西门子中国授权代理商/西门子华南地区指定代理商/西门子模块代理商/西门子变频器代理商/西门子触摸屏代理商/西门子PCL200代理商/西门子PLC300代理商/西门子PCL400代理商/西门子数控伺服代理商/西门子原装授权软件代理商/西门子一级代理商（西门子核心分销商）专业销售西门子S7-200/300/400/1200/1500PLC、数控系统、变频器、人机界面、触摸屏、伺服、电机、西门子通讯电缆、现场总线、DP接头、工控机等，并可提供西门子维修服务，欢迎来电垂询。

SIEMENS中国有限公司
联系人：张柏（销售经理）

工作QQ：254598303
联系人 ：13817011145 wei信同步
邮箱（ Email ）：:254598303@qq.com

哪里有卖要多少钱哪里有哪里能买到要在哪里买在哪里有卖的价格，参数，型号，哪家便宜，比较便宜，哪里有，销售，订货号，多少钱？哪家价格好？厂家，性能，优点，包装，用途，售后服务!哪里有卖代理商总代理商

西门子PLC可编程控制器，西门子PLC200/300/400/1200，西门子变频器，MM440/430/420/G120/6RA70/6ES70/等系列变频器及备件。西门子触摸屏，西门子电缆，西门子网卡，西门子软启动器，西门子低压产品，西门子数控伺服，西门子传动，西门子工控系列模块，CPU.等系列西门子销售与维修。

西门子S7300plc代理商，西门子代理商，上海西门子总代理，西门子上海代理商，西门子电机总代理，上海西门子PLC总代理，上海西门子一级代理，上海西门子变频器总代理，上海西门子销售商，中国总代理西门子电机，西门子中国总代理西门子中国一级代理西门子中国总代理，西门子S7-300PLC, 西门子S7-200PLC总代理，西门子PLC中国总代理，西门子PLC，西门子PLC总代理，，西门子中国总代理，上海西门子PLC总代理，S7-200西门子PLC总代理，西门子S7-300PLC总代理，西门子plc模块总代理,西门子plc编程线总代理，西门子plc编程电缆总代理

SIMATIC HMI KP8/KP8F/32F

订货数据
产品信息
组态工具

跳转到

Overview

Benefits

Area of application

Design

Technical Specifications

Dimensional drawings

More information

Overview

SIMATIC HMI KP32F 和 HMI KP8

空的前端

SIMATIC HMI 按键式面板

具有大号机械按键和多种颜色的照明灯（日光下可读），十分易于操作
接线和安装时间节省 60% 以上（即插即用）
与常规键盘式操作员面板相比，材料成本节约 30% 以上
2 个集成 PROFINET 端口（含交换机），用于设置总线型和环型拓扑
可自由组态的数字量 I/O 可在后面连接其他键控开关、指示灯等
可连接 KP8F 和 KP32F 的故障安全急停按钮或其它故障安全信号(SIL2 或 SIL3)
在功能上兼容所有标准 PROFINET 主站 CPU，也兼容非西门子 CPU
KP8 及空白前端设计，还针对安装在防护等级为 IP65 的 IPC 扩展单元中进行了优化
可进行参数设置，极为灵活
采用空白前端设计，适合对灵活多样的操作员面板进行标准化组装

Benefits

具有模块化设计，与采用分立部件相比，规划和组装工作量减少
节约硬件成本：分布式 I/O，一个设备中组合有 2 个 PROFINET 接口和 I/O
可使用标准打印机（黑白或彩色）打印按键和灯的标签，防护等级为 IP65
灵活性高，可对颜色、开关/按钮功能和集成诊断功能进行任意组态
可针对过程对任何按键颜色进行动态调整
具有用于执行器和传感器的集成标准输入和输出，每个针脚都可用作输入或输出
空白前端设计为随后进行的系统扩展预留了空间，便于安装标准 22.5 mm 操作部件
SIMATIC 人机面板系列中的功能与设计实现了最佳匹配，例如，PRO 设备扩展单元中的功能与设计。
“F”型号具有 SIL 2/3 安全等级，例如，可直接连接急停按钮

关于其它详细信息，请参见手册：

http://support.automation.siemens.com/WW/view/en/56652789

Area of application

由于前端平滑而坚固，非常适合绝大多数市场领域（汽车、食品与饮料、石油与天然气等），甚至可在危险区域使用（请参见技术数据）
接线很少，操作直观、快速，十分方便
按键中具有多种颜色的 LED 灯，可不通过语言提供反馈信息，即使在阳光下也能读取
内置型面板可进行扩展，无需使用切割工具
灵活性高，适合专用机器制造

Design

SIMATIC HMI 按键式面板 – 空白前面板设计

可以使用安装架简便安装
采用坚固的设计，适用于恶劣的工业环境
可安装 22.5 mm 标准部件
标准 22.5 mm 操作部件安装方便，便于在运行期间进行改装

SIMATIC HMI 按键式面板 – 基本功能

光滑的前端，易于清洁
可对大号机械带照明按钮单元进行编程，以作为开关或按钮使用
24 VDC 回路电源，无需附加端子
两个 PROFINET 接口，非常适合总线型操作
采用介质冗余协议 (MRP)，适合环网运行，即使在 PROFINET 电源电缆断开的情况下，也可正常运行
输入和输出位于后部，每个针脚都可用作输入或输出
F 型号还配备有 SIL 2/3 输入

SIMATIC HMI KP8 PN

8 个带机械照明的大号按钮具有良好的触觉反馈，因此也适合在恶劣的工业环境中使用。
8 个可自由组态的数字量 I/O
用于标准型 CPU

SIMATIC HMI KP8F PN

具有额外的数字量故障安全输入，用于连接单通道或一个双通道传感器（例如，用于急停）
用于故障安全 CPU

SIMATIC HMI KP32F PN

32 个带机械照明的大号按钮具有良好的触觉反馈，因此也适合在恶劣的工业环境中使用。
16 个可自由组态的数字量 I/O
具有额外的数字量故障安全输入，用于 4 个单通道或 2 个双通道传感器（例如，用于急停）
用于故障安全和标准型 CPU

演示箱

SIMATIC HMI 按键式面板 – 低成本演示和实验箱

该箱包含一个用于 1211C CPU的 KP8（含演示程序），放置在一个随时备用的小型有机玻璃支架上。

内容：
- 1x 箱
- 1x KP8 PN
- 1x CPU1211C
- 1x 支架，固定接线，包括程序
可通过一个标准的便携式 PC 电源适配器供电（电源适配器不在供货范围内）
根据要求提供价格与交货时间

可通过发送传真订购：

Siemens AG, Mr. Michael Christ

Industry Sector, I IA CE SE MF RS FDS

Wuerzburger Str. 121, 90766 Fuerth, Germany

电话：+49 911 750-4128 / 传真： +49 911 750-2411

Technical Specifications

Order number	6AV3688-3AY36-0AX0	6AV3688-3AF37-0AX0	6AV3688-3EH47-0AX0
	SIMATIC HMI KP8 PN	SIMATIC HMI KP8F PN	SIMATIC HMI KP32F PN
General information
Product type designation	SIMATIC HMI KP8 PN	SIMATIC HMI KP8F PN	SIMATIC HMI KP32F PN
Control elements
With parameterizable keys	Yes	Yes	Yes
Keyboard fonts
● Membrane keyboard
— user-definable label membrane keys	Yes	Yes	Yes
● Short-stroke keys
— Number of short-stroke keys	8	8	32
Expansions for operator control of the process
● DP direct LEDs (LEDs as S7 output I/O)	8; Adjustable brightness	8; Adjustable brightness	8; Adjustable brightness
● Number of color modes for LED	5; Red, green, blue, yellow, white	5; Red, green, blue, yellow, white	5; Red, green, blue, yellow, white
● Direct keys (keys as S7 input I/O)	8	8	32
Installation type/mounting
Mounting position	vertical	vertical	vertical
Rack mounting possible	No	No	No
Front installation possible	Yes; Compatible with extension unit dimensions	Yes; Compatible with extension unit dimensions	Yes
Rail mounting possible	No	No	No
Wall mounting/direct mounting possible	No	No	No
Mounting in portrait format possible	Yes	Yes	Yes
Mounting in landscape format possible	Yes	Yes	Yes
maximum permissible angle of inclination without external ventilation	30°; To the front/rear	30°; To the front/rear	30°; To the front/rear
Mounting technology	Mounting clip	Mounting clip	Mounting clip
Number of slots for command devices and signaling units	0	0	0
Supply voltage
Type of supply voltage	DC	DC	DC
Rated value (DC)	24 V; 24 V can be looped through connector, interrupted when pulled	24 V; 24 V can be looped through connector, interrupted when pulled	24 V; 24 V looped through at connector, no interruption on pulling
permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Type of output
LED colors
● red	Yes	Yes	Yes
● yellow	Yes	Yes	Yes
● green	Yes	Yes	Yes
● white	Yes	Yes	Yes
● blue	Yes	Yes	Yes
Digital inputs
Number of digital inputs	8; Total inputs and outputs max. 8 and 1x SIL 2 or 2x SIL 3	8; Total inputs and outputs max. 8 and 1x SIL 2 or 2x SIL 3	32; Total inputs and outputs max. 32 and 2x SIL 2 or 4x SIL 3
Input voltage
● Rated value (DC)	24 V	24 V	24 V
Digital outputs
Number of digital outputs	8; Max. 8 inputs and outputs (total)	8; Max. 8 inputs and outputs (total)	16; Max. 32 inputs and outputs (total)
Short-circuit protection	Yes	Yes	Yes
Switching capacity of the outputs
● with resistive load, max.	100 mA	100 mA	100 mA
Output voltage
● Rated value (DC)	24 V; Non-isolated	24 V; Non-isolated	24 V; Non-isolated
Total current of the outputs
● Current per channel, max.	100 mA	100 mA	100 mA
● Current per group, max.	800 mA	800 mA	800 mA
Interfaces
Number of industrial Ethernet interfaces	2; For the construction of lines and rings without external switch	2; For the construction of lines and rings without external switch	2; For the construction of lines and rings without external switch
Number of PROFINET interfaces	2; Incl. switch	2; Incl. switch	2; Incl. switch
Industrial Ethernet
● Industrial Ethernet status LED	2; Per port	2; Per port	2; Per port
● Number of ports of the integrated switch	2; Per port	2; Per port	2; Per port
Protocols
PROFINET	Yes; also 3rd party PLC	Yes; also 3rd party PLC	Yes; incl. shared device, 3rd party PLC
PROFINET CBA	No	No	No
IRT	Yes	Yes	Yes
MRP	Yes	Yes	Yes
PROFIsafe	No	Yes; 1x SIL 2 (two-channel) or 2x SIL 3 (single-channel) emergency stop sensor	Yes; 2x SIL 2 (two-channel) or 4x SIL 3 (single channel) emergency stop sensor
PROFIBUS	No	No	No
Test commissioning functions
Illuminant test	Yes; During switch on	Yes; During switch on	Yes; During switch on
Key and signal lamp test	Yes; Automatically when switching on	Yes; Automatically when switching on	Yes; Automatically when switching on
EMC
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas	Yes; Group 1, measured at a distance of 10 m	Yes; Group 1, measured at a distance of 10 m	Yes; Group 1, measured at a distance of 10 m
● Limit class B, for use in residential areas	No	No	No
Degree and class of protection
IP (at the front)	IP65	IP65	IP65
Enclosure Type 4 at the front	No	No	No
Enclosure Type 4x at the front	Yes; Incl. NEMA12	Yes; Incl. NEMA12	Yes; Incl. NEMA12
IP (rear)	IP20	IP20	IP20
Standards, approvals, certificates
CE mark	Yes	Yes	Yes
cULus	Yes	Yes	Yes
RCM (formerly C-TICK)	Yes	Yes	Yes
KC approval	Yes	Yes	Yes
Suitable for safety functions	Yes	Yes	Yes
Marine approval
● Germanischer Lloyd (GL)	No	No	No
● American Bureau of Shipping (ABS)	No	No	No
● Bureau Veritas (BV)	No	No	No
● Det Norske Veritas (DNV)	No	No	No
● Lloyds Register of Shipping (LRS)	No	No	No
● Nippon Kaiji Kyokai (Class NK)	No	No	No
● Polski Rejestr Statkow (PRS)	No	No	No
Use in hazardous areas
● ATEX Zone 2	Yes	Yes	No; On request
● ATEX Zone 22	Yes	Yes	No; On request
● cULus Class I Zone 1	No	No	No
● cULus Class I Zone 2, Division 2	Yes	Yes	No; On request
● FM Class I Division 2	Yes	Yes	No; On request
Ambient conditions
Ambient temperature during operation
● min.	0 °C	0 °C	0 °C
● max.	55 °C	55 °C	55 °C
● Operation (vertical installation)
— For vertical installation, min.	0 °C	0 °C	0 °C
— For vertical installation, max.	55 °C	55 °C	55 °C
● Operation (max. tilt angle)
— At maximum tilt angle, min.	0 °C	0 °C	0 °C
— At maximum tilt angle, min.	45 °C	45 °C	45 °C
● Operation (vertical installation, portrait format)
— For vertical installation, min.	0 °C	0 °C	0 °C
— For vertical installation, max.	45 °C	45 °C	45 °C
● Operation (max. tilt angle, portrait format)
— At maximum tilt angle, min.	0 °C	0 °C	0 °C
— At maximum tilt angle, min.	45 °C	45 °C	45 °C
Ambient temperature during storage/transportation
● min.	-20 °C	-20 °C	-20 °C
● max.	60 °C	60 °C	60 °C
Relative humidity
● Operation, max.	95 %; no condensation	95 %; no condensation	95 %; no condensation
Configuration
Configuration software
● STEP 7 Basic (TIA Portal)	Yes	Yes	Yes
● STEP 7 Professional (TIA Portal)	Yes	Yes	Yes
Functionality under WinCC (TIA Portal)
Process coupling
● S7-1200	Yes; with ET 200pro CPU and ET 200S CPU	Yes; with ET 200pro CPU and ET 200S CPU	Yes; with ET 200pro CPU and ET 200S CPU
● S7-1500	Yes	Yes	Yes
● S7-200	No	No	No
● S7-300/400	Yes; with F-CPU: STEP 7 V11 SP1 (or higher) and Safety V11 (or higher) or SIMATIC STEP 7 Basic V11 (or higher)	Yes; with F-CPU: STEP 7 V11 SP1 (or higher) and Safety V11 (or higher) or SIMATIC STEP 7 Basic V11 (or higher)	Yes; with F-CPU: STEP 7 V11 SP1 or higher and Safety V11 (or higher), without F-CPU STEP 7 or SIMATIC STEP 7 Basic V11 (or higher)
● LOGO!	No	No	No
● WinAC	Yes	Yes	Yes
● SIMOTION	No	No	No
● Allen Bradley (EtherNet/IP)	No	No	No
● Allen Bradley (DF1)	No	No	No
● Mitsubishi (MC TCP/IP)	No	No	No
● Mitsubishi (FX)	No	No	No
● OMRON (FINS TCP)	No	No	No
● OMRON (LINK/Multilink)	No	No	No
● Modicon (Modbus TCP/IP)	No	No	No
● Modicon (Modbus)	No	No	No
Mechanics/material
Enclosure material (front)
● Plastic	Yes	Yes	No
● Aluminum	No	No	Yes
Service life
● Short-stroke keys (in switching cycles)	1 500 000	1 500 000	1 500 000
● LEDs (ON period)	100 %	100 %	100 %
Dimensions
Width of the housing front	98 mm	98 mm	295 mm
Height of housing front	155 mm	155 mm	155 mm
Mounting cutout, width	68 mm; Max. thickness of mounting plate 2 - 6 mm	68 mm; Max. thickness of mounting plate 2 - 6 mm	277 mm; Max. thickness of mounting plate 2 - 6 mm
Mounting cutout, height	129 mm	129 mm	137 mm
Overall depth	49 mm; Incl. angled SIMATIC Ethernet connector	49 mm; Incl. angled SIMATIC Ethernet connector	69 mm; Incl. angled SIMATIC Ethernet connector
Weights
Weight without packaging	280 g	280 g	1 220 g

Order number		6AV3688-3XY38-3AX0
		KP8 DESIGN BLANK FRONT
General information
Product type designation		SIMATIC HMI design empty front
Control elements
With parameterizable keys		No
Keyboard fonts
● Function keys
— Number of function keys		0
Installation type/mounting
Mounting position		Any
Rack mounting possible		No
Front installation possible		Yes; Compatible with extension unit dimensions
Rail mounting possible		No
Wall mounting/direct mounting possible		No
Mounting in portrait format possible		Yes
Mounting in landscape format possible		Yes
maximum permissible angle of inclination without external ventilation		180°; To the front/rear
Mounting technology		Clamp terminals
Number of slots for command devices and signaling units		5; Max. 5 possible
Supply voltage
Type of supply voltage		external
Type of output
LED colors
● red		No
● yellow		No
● green		No
● white		No
● blue		No
Interfaces
Number of USB interfaces		0
Test commissioning functions
Key and signal lamp test		No
EMC
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas		No
● Limit class B, for use in residential areas		No
Degree and class of protection
IP (at the front)		IP65
Enclosure Type 4 at the front		No
Enclosure Type 4x at the front		No
IP (rear)		IP20
Standards, approvals, certificates
CE mark		Yes
cULus		No
RCM (formerly C-TICK)		No
KC approval		No
Suitable for safety functions		Yes; e.g. installation of emergency stop
Marine approval
● Germanischer Lloyd (GL)		No
● American Bureau of Shipping (ABS)		No
● Bureau Veritas (BV)		No
● Det Norske Veritas (DNV)		No
● Lloyds Register of Shipping (LRS)		No
● Nippon Kaiji Kyokai (Class NK)		No
● Polski Rejestr Statkow (PRS)		No
Use in hazardous areas
● ATEX Zone 2		No
● ATEX Zone 22		No
● cULus Class I Zone 1		No
● cULus Class I Zone 2, Division 2		No
● FM Class I Division 2		No
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		55 °C
● Operation (vertical installation)
— For vertical installation, min.		0 °C
— For vertical installation, max.		55 °C
● Operation (max. tilt angle)
— At maximum tilt angle, min.		0 °C
— At maximum tilt angle, min.		45 °C
● Operation (vertical installation, portrait format)
— For vertical installation, min.		0 °C
— For vertical installation, max.		45 °C
● Operation (max. tilt angle, portrait format)
— At maximum tilt angle, min.		0 °C
— At maximum tilt angle, min.		45 °C
Ambient temperature during storage/transportation
● min.		-20 °C
● max.		60 °C
Relative humidity
● Operation, max.		95 %
Mechanics/material
Enclosure material (front)
● Plastic		No
● Aluminum		Yes
● Stainless steel		No
Dimensions
Width of the housing front		98 mm
Height of housing front		155 mm
Mounting cutout, width		68 mm; Max. thickness of mounting plate 2 - 6 mm
Mounting cutout, height		129 mm
Overall depth		49 mm
Weights
Weight without packaging		240 g

Dimensional drawings

所有尺寸都以 mm 为单位。安装切口参见技术规范。

SIMATIC HMI 按键式面板 KP8；安装尺寸也适用于空白前端设计

SIMATIC HMI 按键式面板 KP32F

More information

其它信息，请访问我们的网站：

http://www.siemens.com/simatic-key-panels

关于附件，请参见人机界面附件部分。

注：

您是否需要对这里所述的产品进行特定改动或扩展？如果需要这样的设计，请参见“定制自动化”。在这里，您可了解其他产品和通常可以获得的特定领域产品以及供客户进行特定改动与调整的选件。

产品与解决方案在线目录与订购系统技术信息服务与支持联系人与合作伙伴服务项目