如下为我司爱泽工业IZE_Industries本月到货USA TOLERANCE RING相关产品，欢迎致电索取样本资料和产品信息。
USA TOLERANCE RING公差环BN55X10S
USA TOLERANCE RING公差环AN85X19
USA TOLERANCE RING公差环AN85X19S
USA TOLERANCE RING公差环BN35X17S
USA TOLERANCE RING公差环BN150075S
USA TOLERANCE RING公差环AN系列介绍
AN系列有朝内的波纹。AN系列在自由状态下是“打开的”，因此当安装在孔内时，环将符合该孔并且是自固定的。如果与居中或半居中布置一起使用，则在装配配套机器部件期间无需进一步处理环。当与自由布置一起使用时，环必须在配套机器部件的组装过程中得到轴向支撑。
AN系列被剪裁成一定长度，以适应“标称”周长之外的尺寸。使用 AN 型的示例包括安装轴承外圈，或将风扇或皮带轮安装到普通英制或公制直径的轴上。
AN rings have corrugations that face inward. The style ring is “open” in the free state so that when installed inside a bore the ring will to that bore and be self retaining. If used with the centered or half-centered arrangement no further handling of the ring is necessary during assembly of the mating machine parts. When used with the free arrangement, the ring must be supported axially during assembly of the mating machine parts.
The AN style is cut to length so as to fit outside a “nominal” circumference. Examples for use of the AN style include mounting a bearing outer race, or mounting a fan or pulley to a shaft of common inch or metric diameter.
USA TOLERANCE RING公差环BN系列介绍
BN 型环的自由状态直径小于它们要安装在其上的轴直径，因此当安装到轴上时，环符合并在轴上自固定。如果与居中或半居中布置一起使用，环将卡入凹槽中，无需进一步处理环。如果与自由布置一起使用，则在配合部件的组装过程中必须对环进行轴向支撑。
BN 环被切割以适合标称圆周。BN 环的使用示例包括将轴承内圈安装到轴上，或者在其中修改轴比修改外部构件的孔更实用的组件。
BN style rings have a free-state diameter smaller than the shaft diameter over which they are to be installed, so that when mounted to the shaft the rings to and become self-retaining on the shaft. If used with the centered or half-centered arrangement, the ring will snap into the groove and no further handling of the ring is necessary. If used with the free arrangement, the ring must be axially supported during assembly of the mating parts.
The BN ring is cut to fit inside a nominal circumference. Examples for use of the BN ring include mounting a bearing inner race to a shaft, or assemblies in which modification of the shaft is more practical than modifying the bore of the outer member.
USA TOLERANCE RING公差环ANL系列介绍
ANL型可以描述为非常轻便的AN型公差环。这种环的特征通常是在自由状态下不具有圆形形状。ANL 环的波纹也向内，是 AN 环的轻型版本。使用的材料非常薄，因此 ANL 环在自由状态下不会保持圆形。这些轻型环主要用于安装力必须绝对保持在限度的地方，以及环承受低径向载荷的地方。
The ANL style may be described as a very light duty AN style ring. It is often characteristic of this ring to not have a circular shape in the free state. ANL rings have corrugations that also face inward and are light-duty versions of AN rings. The material that is used is very thin, so ANL rings do not maintain a circular shape in their free state. These light duty rings are used primarily where installation forces must be kept to a minimum and where the ring will see low radial loads.
USA TOLERANCE RING公差环常用型号：
USA TOLERANCE RING AN85X19S
USA TOLERANCE RING BN55X10S
USA TOLERANCE RING AN85X19
USA TOLERANCE RING BN150075S
USA TOLERANCE RING BN35X17S
USA TOLERANCE RING BN125075S
USA TOLERANCE RING BN137068S
USA TOLERANCE RING BN45X10S
USA TOLERANCE RING BN150075S
USA TOLERANCE RING BN40X14S
USA TOLERANCE RING BN162100S
USA TOLERANCE RING BN175100S
USA TOLERANCE RING BN200100S
USA TOLERANCE RING BN6X6S
USA TOLERANCE RING BN10X7S
USA TOLERANCE RING BN12X5S
USA TOLERANCE RING AN110X25S9
USA TOLERANCE RING AN120X22S9
USA TOLERANCE RING AN120X25S9
USA TOLERANCE RING AN125X22S9
USA TOLERANCE RING AN130X25S9
USA TOLERANCE RING AN130X31S9
USA TOLERANCE RING AN140X25S9
USA TOLERANCE RING AN140X33S9
USA TOLERANCE RING AN150X25S9
USA TOLERANCE RING AN150X33S9
USA TOLERANCE RING AN160X25S9
USA TOLERANCE RING AN160X33S9
USA TOLERANCE RING AN170X39S9
USA TOLERANCE RING AN180X39S9
USA TOLERANCE RING AN190X39S9
如果您需要完整的USA TOLERANCE RING的相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。
If you have any question for USA TOLERANCE RING，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
