DPW100系列 / DPW100 Series

《產品介紹 note》：

產品編碼 Code No.	倍比 Ratio	輸出壓力 Outlet Pressure(Ph*)	吐出量(往返一次) Fluid volume for cycle (L/cycle)	耗氣量(往返一次) Consumption for cycle (L/cycle)
DPW100002	2:1	1Pd**+Ps***	8.8	(1.602xPd+1.655)/1.033
DPW100004	4:1	3Pd+Ps	2.24
DPW100006	6:1	5Pd+Ps	1.43
DPW100011	11:1	10Pd+Ps	0.8

* PH= Outlet Pressure / ** PD= Driven Pressure / *** PS = Supply Pressure / Pressure Ratio=PH/PD / signal pressure≥ Pd pressure

附註：設定驅動壓(PD) = 6 kg/cm2, 被壓縮壓(PS) = 6 kg/cm2壓力時,則『每分鐘PH輸出量』及『驅動壓(PD)往返一次耗氣量』所得到的數值如表格內所載明.
Note :If Driven Pressure (PD) is 6 kg/cm2, Supply Pressure (PS) is 6 kg/cm2 pressure, the 『Per minute PH of output』and 『Driven pressure consumption by cycle』the resulting values in the b described.
舉例:當氣體增壓泵浦規格為DPW100004,在PD=6 kg/cm2且 PS=6 kg/cm2的壓力時,則『每分鐘PH輸出量』所得之計算數值為:126 l/min;另外『驅動壓(PD)往返一次耗氣量』所得之計算數值為10.8L
For example: When High Pressure Gas Booster specifications for DPW100004, in the PD is 6 kg/cm2 and PS is 6 kg/cm2 pressure, the 『Per minute PH of output』of calculated values are: 126 l/min; Additionally 『Driven pressure consumption by cycle』calculated values to 10.8L.

---

規格及外觀本公司擁有異動的權益,不另行通知,如蒙採購請與敞公司業務部門聯絡,以利新版本更換.
We reserve the rights of changing Specifications and Appearances of the products without previous notice. Please contact to our Sales Department for latest product inbation.