TSM-1000 is one of the smallest designed facing tools on the market today. The machine is powered by an air cooled 18V-Li Metabo battery motor and the total working weight of the machine is 6 lbs. The design of this machine makes it easy to use on job sites – making hard-to-reach areas easily accessible due to it’s small size. It has a battery powered motor, which will last for 2+ hours, with a 15 min. recharge. Collets are made from Stainless Steel material and are self-locking into the cutter to hold the collets in place.
TSM-1000便携式平口机是目前市场上最小的平口机之一。该机型由18V的Metabo锂电池电钻驱动，整机的重量约为6磅（2.6KG）。这种机型适用于安装施工现场，由于它的尺寸很小，尤其方便在空间窄小的区域工作。 电钻通过电池驱动可以持续工作2个小时以上，并且充电时间只要15分钟。夹具由不锈钢制作成，并且可以自锁于排屑 套筒上将夹具固定在正确位置。 PERFORMANCE • Size range 1/8” to 1” (3.175 mm - 25.4 mm) • 18V Metabo air cooled Li powered battery motor • Easy replacement of collets and size ranges • Uses Stainless Steel collet set (upper / lower) • 6 lbs. (2.6 kg) approximate working weight • Faces most bls and plastics, including high nickel materials • Tool bit designed to keep chip out of polished ID • Tool bits are designed to work on the following materials: stainless steel, inconel, hasbloy, carbon steels, aluminum, and a variety of other alloys. 性能 : 管径范围（外径）：1/8〞-1〞(3.175mm-25.4mm)； 18V的Metabo锂电池电钻驱动； 两面式刀片让刀片寿命更长； 夹具使用不锈钢材料，尺寸多且更换方便； 重量约6磅（2.6公斤），方便现场操作； 可以切削大多数的金属和塑胶，包括高镍合金材料； 设计的刀片使切屑避开管内壁； 刀片可以切削以下几种材料：不锈钢，铬镍铁合金，镍基合金，碳钢，铝合金以及其他的一些合金材料 • Battery charger: 电钻 110V;60Hz US Style / 220V;50Hz CE Compliant110V 交流；60Hz 美国标准/220V 交流；50Hz 通过CE认证
PART NUMBERS / ORDER INFO: 配件型号/订单信息 TSM-1000 Machine Kit Includes: Machine, Battery charger，Standby battery, Tool Bits(2), Tooling, Manual and Case 标配： 平口机，充电器，备用电池，2个随机刀片，工具，手册和特制手提箱
