TSM-6000

This lightweight 42 lb. Facing Machine has a wide working range of 1 to 6.625 inches OD. With our machine you do not have to change adapters if you change tubing size.

Size range 1 to 6.625 inches (25.4 mm - 168.3 mm)
 

管径范围: 1” (50.8mm) 到 6.625” (168.3mm)

该机型重量为42磅（19.05公斤），切割的管径范围为1 ” 到 6.625” 。管子更换时不必更换连接块，这一点不同于市场上的其他一些机器 。

PERFORMANCE:

• 110V variable speed control motor with electronic feedback maintains constant RPM under load

• Rugged two speed design to fit more applications

• Quick close latching system reduces setup time

• Comes with bench stand

• Easy replacement of collets and size ranges

• 42 lbs. approximate working weight

• Adjustable measure indicator for accurate facing 0.001 inches or longer

• Large view port for easy bit replacement

• Faces most bls and plastics, including high nickel and carbon steel materials

• Tool bit designed to keep chip out of polished ID
  
  基本特征：

•设计用于切削短管以及长度在1”到6.625” （25.4mm 到 168.3mm）范围内的管件 。

•带有电子反馈功能的重型负载220V变速电机，使得电机转速在不同的载荷下保持恒定转速

•既可作为便携式又可安装在台面用作批量生产

•大观察孔提供最大的观察区间且便于刀具更换

•通过刀具的设计，切屑避开了抛光的管内圆

•可调测量指示刻度用于更精确的平口切削，最小刻度值为0.0254mm(0.001”)

•快速锁紧机构节省了大量安装时间

•弹性夹具提高了不圆的管件的定位精度和夹持可靠性

•刀架上带有刻度，使刀具位置确定极其方便

•随机配置台面固定底座

For TSM-6000 accessories, please visit our website or contact our sales department for further assistance.