德国REIKU机器人管线包组合内夹（Combi Middle Jaws）
REIKU Middle Jaws / REIKU Combi Middle Jaws
REIKU代理商：上海颐品自动化科技有限公司
关键词：REIKU尼龙软管，REIKU机器人尼龙软管，德国REIKU-PA12尼龙软管
REIKU尼龙软管接头，REIKU尼龙软管固定座，REIKU防撞块，REIKU星型分线头
REIKU尼龙软管，REIKU编织网管，REIKU机器人软管，REIKU管夹支架，
REIKU防撞块，REIKU尼龙软管接头，REIKU尼龙固定座，REIKU尼龙软管
REIKU法兰盘，REIKU分线头，REIKU中间内夹，REIKU直通接头和内夹
The Gripping Clamp’s function is dictated by the type of Jaw Set that is inserted into the Clamp. The Gripping Clamp can hold the conduit in place allowing no lateral movement or the gripping clamp can be used as a “halo” and the conduit can move laterally. All of the Jaw Sets rotate radially 360° inside the Gripping Clamp.
Description：
Combi Middle Jaws have four ridges that lock into the corrugations of the conduit and prevent the conduit from moving laterally through the Gripping Clamp assembly. The Combi Middle Jaws are wider than the Middle Jaw and are used to “splice” two lengths of conduit together or to attach Cabletar grommets to the conduit at termination points. The conduit and the Cablestar would each occupy 50% of the Combi Middle Jaw with two ridges of the Combi Jaw locking into two grooves of the conduit and the remaining two ridges locking into two grooves in the Cablestar grommet.
* All of the REIKU Jaw sets (except Comb Jaws) rotate in an orbital/radial direction inside the Gripping Clamp in order to prevent/ remove torsion load.
|
Part No.
|
REIKU组合型中间内夹
|
Quantity
|
|
PAKMB-17 F/G
|
Middle/Combi Jaw Middle Jaw
|
25
|
|
PAKMB-36/36
|
Middle Jaw
|
10
|
|
PAKMB-68
|
Middle/Combi-Jaw
|
10
|
|
PAKMB-70
|
Middle/Combi-Jaw
|
10
|
|
PAKMB-90
|
Middle/Combi-Jaw
|
10
|
REIKU Middle Jaws / REIKU Combi Middle Jaws
REIKU代理商：上海颐品自动化科技有限公司
关键词：REIKU尼龙软管，REIKU机器人尼龙软管，德国REIKU-PA12尼龙软管
REIKU尼龙软管接头，REIKU尼龙软管固定座，REIKU防撞块，REIKU星型分线头
REIKU尼龙软管，REIKU编织网管，REIKU机器人软管，REIKU管夹支架，
REIKU防撞块，REIKU尼龙软管接头，REIKU尼龙固定座，REIKU尼龙软管
