订货代码 :   BAW001Z
BAW M18ME-UAC50B-BP00,2-GS04

Keyfeatures
Size  M18
Connection  Pigtail, M12x1-S04, 0,2m, PUR
Linearity range Sl  1...5 mm
Output voltage at Sl min.  0 V
Output voltage at Sl max.  10 V
General attributes
Mechanical installation condition  Flush (shielded)
Power indicator  No
Basic standard  BWN PR 44, IEC 60947-5-7
Enclosure Type per IEC 60529  IP67
Protected against polarity reversal  Yes
Protected against miswiring  Yes
Additional text  Values referenced to axial approach of St 37 target. For other materials correction factors are applied.
When used in Balluff clamping holders, Ua may be reduced by max. 10%
Series  M18
Electrical attributes
Connection type  Pigtail
Rated operating voltage Ue DC  24
Rated frequency, AC  DC
Rated insulation voltage Ui  75 DC
Electrical version  DC, direct current
Ripple max. (% of Ue)  15
Principle of operation  Inductive
Limit frequency -3dB  500 Hz
Output voltage at Se  5 V
Non-linearity max.  ±120 µm
No-load current max. Io at Ue  10 mA
Operating voltage  15...30 V DC
Mechanical attributes
Tightening torque  25 Nm / 35 Nm
Cable short designation  LiFYY11Y-O
Cable length  0,2 m
Connector type  M12x1-S04
Oberflächenschutz  Nickel-plated
Shock rating  Shock, half-sinus, 30 gn, 11ms
Vibration rating  55 Hz, 1 mm ampl., 3x30 min
Ambient temperature Ta min.  -10 °C
Ambient temperature Ta max.  70 °C
Degree of contamination  3
Sensing surface material  PBT
Housing material  Brass
Cable jacket material  PUR
Cable diameter D max.  5,1
Response time  1 ms
Measuring speed max.  40 m/s
Optical operating temperature min.  10 °C
Optical operating temperature max.  50 °C
Max. temp. drift from end value  ±5.0 %
Temperature coefficient min.  0.0 µm/K
Temperature coefficient max.  -4.0 µm/K
Temperature coefficient typ.  -1.0 µm/K
Repeat accuracy per BWN  ±8.0 µm
Adjustment indicator  Yes
Repeat acc. R of end value max.  3
Rated operating dist. Se  3 mm