产品简介
西门子SIPLUS SM 532 模拟量信号模块
西门子SIPLUS SM 532 模拟量信号模块
产品价格:¥88
上架日期:2015-06-23 10:09:10
产地:德国
发货地:上海
供应数量:不限
最少起订:1台
浏览量:198
资料下载:暂无资料下载
其他下载:暂无相关下载
详细说明

    西门子SIPLUS SM 532 模拟量信号模块

     花30秒询价,你会知道什么叫优势;花60秒咨询,你会知道什么叫服务;
    合作一次,你会知道什么叫质量!以质量求生存,以信誉求发展。我将提供一流的质量,服务作为自已最重要的责任。

    别人没有得我们有,别人有得,我们的比别人得更好。

    选择上海励辉您的不二选择,向道高给您报价!

    有您的信任才有我的明天。期待您的询价!!! 
    SIEMENS上海励辉自动化科技有限公司

    联系人 :向道高( 销售经理 )

    电话(Tel):021-61531018

    传真(Fax):021-33737848

    商务( Q Q ):2880585011

    24小时销售技术服务热线 :13701945634

    邮箱(Email):2880585011@qq.com

    地址(Add):上海市松江区文诚路2188弄151号

    公司目标:做西门子自动化控制领域最好的系统集成伙伴、
    做西门子自动化系统集成方案的专业提供商、
    公司所售出的产品,全新原装,质保一年、但凡发现有任何质量问题,
    可无条件退换货物(非人为损坏、15天内)

    以下为产品相关介绍,如有任何疑问 请来电咨询!

    Overview

    • 4 通道模拟量输出模块
    • 极短的转换时间
    • 用于连接模拟执行器,无需附加放大器
    • 甚至可应对更为复杂的自动化任务
    注意:

    SIPLUS extreme 产品是基于西门子工业标准产品的。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息

    Area of application

    模拟量输出模块可以将 16 位数字值转换为电流或电压并输出到过程。例如,它们适合控制比例阀或小型伺服驱动器。

    Design

    • 用一个螺钉安装在 S7-1500 安装导轨上
    • 标准 40 针前连接器,采用螺钉型端子或推入技术
    • 可连接芯线截面积0.25 mm2 至 1.5 mm2(AWG24 至 16),无论使用的前连接器如何
    • 可将前连接器设定在预接线位置
    • 前盖带有可扩充的电缆室,即使完全接线时也如此
    • 集成式屏蔽
    • 模块正面的清晰标签
      • 模块类型
      • 订货号
      • 硬件和固件型号
      • 通道编号标签
      • 电缆连接图

    含在供货范围之内:

    • 馈电元件、屏蔽夹和屏蔽端子
    • 用于手工贴标签的一个标签条
    • 一个 U 型连接器
    • 印制有文字的前门

    Functions

    • 统一的显示和诊断方式:
      • 故障(红色 LED)和运行(绿色 LED)模块状态显示
      • 通道状态显示(通道已激活或已禁用,绿色 LED)或诊断显示(红色 LED)
      • 显示 24 V DC 电源电压(绿色 LED)
    • 支持的功能:
      • 持续稳定的 16 位高分辨率
      • 识别和维护数据 IM0 至 IM3
      • 固件更新
      • 与通道相关的参数分配
      • 按通道诊断(取决于测量类型/测量范围)
      • 可为输出设置替代值
      • 在运行过程中进行校准
      • 等时同步模式(取决于模块)

    Technical Specifications

    Order number

    6AG1532-5HD00-7AB0

    6AG1532-5HF00-7AB0

    SIPLUS S7-1500 AQ 4XU/I ST

    SIPLUS S7-1500 AQ 8XU/I HS

    Product type designation

    General inbation

    Product function

    • I&M data

    Yes; I&M0 to I&M3

    Yes; I&M0 to I&M3

    Engineering with

    • STEP 7 TIA Portal can be configured/integrated as of version

    V12 / V12

    • STEP 7 can be configured/integrated as of version

    V5.5 SP3 / -

    CiR - Configuration in RUN

    Rebeterization possible in RUN

    Yes

    Calibration possible in RUN

    Yes

    Supply voltage

    Type of supply voltage

    DC

    DC

    Rated value (DC)

    24 V

    24 V

    Reverse polarity protection

    Yes

    Analog outputs

    Number of analog outputs

    4; > +60 °C max. 4x ±10 V permissible

    8; > +60 °C max. 4x ±10 V permissible

    Cycle time (all channels), min.

    3.2 ms; independent of number of activated channels

    125 µs; independent of number of activated channels

    Output ranges, voltage

    • 0 to 10 V

    Yes

    Yes

    • 1 V to 5 V

    Yes

    Yes

    • -10 V to +10 V

    Yes

    Yes

    Output ranges, current

    • 0 to 20 mA

    Yes

    Yes

    • -20 mA to +20 mA

    Yes

    Yes

    • 4 mA to 20 mA

    Yes

    Yes

    Connection of actuators

    • for voltage output two-wire connection

    Yes

    Yes

    • for voltage output four-wire connection

    Yes

    Yes

    • for current output two-wire connection

    Yes

    Yes

    Load impedance (in rated range of output)

    • with voltage outputs, min.

    1 kΩ; 0.5 kOhm at 1 to 5 V

    1 kΩ

    • with voltage outputs, capacitive load, max.

    1 µF

    100 nF

    • with current outputs, max.

    750 Ω

    500 Ω

    • with current outputs, inductive load, max.

    10 mH

    1 mH

    Cable length

    • shielded, max.

    800 m; for current, 200 m for voltage

    Analog value generation for the outputs

    Integration and conversion time/resolution per channel

    • Conversion time (per channel)

    0.5 ms

    50 µs

    • Basic execution time of the module (all channels released)

    125 µs

    Settling time

    • for resistive load

    1.5 ms

    30 µs; see additional debion in the manual

    • for capacitive load

    2.5 ms

    100 µs; see additional debion in the manual

    • for inductive load

    2.5 ms

    100 µs; see additional debion in the manual

    Errors/accuracies

    Basic error limit (operational limit at 25 °C)

    • Voltage, relative to output area, (+/-)

    0.2 %

    0.2 %

    • Current, relative to output area, (+/-)

    0.2 %

    0.2 %

    Isochronous mode

    Isochronous operation (application synchronized up to terminal)

    Yes

    Execution and activation time (TCO), min.

    100 µs

    Bus cycle time (TDP), min.

    250 µs

    Interrupts/diagnostics/status inbation

    Substitute values connectable

    Yes

    Yes

    Alarms

    • Diagnostic alarm

    Yes

    Yes

    Diagnostic messages

    • Diagnostics

    Yes

    Yes

    • Monitoring the supply voltage

    Yes

    Yes

    • Wire break

    Yes; Only for output type "current"

    Yes; Only for output type "current"

    • Short circuit

    Yes; Only for output type "voltage"

    Yes; Only for output type "voltage"

    • Overflow/underflow

    Yes

    Yes

    Diagnostics indication LED

    • RUN LED

    Yes; Green LED

    Yes; Green LED

    • ERROR LED

    Yes; Red LED

    Yes; Red LED

    • Monitoring of the supply voltage (PWR-LED)

    Yes; Green LED

    Yes; Green LED

    • Channel status display

    Yes; Green LED

    Yes; Green LED

    • for channel diagnostics

    Yes; Red LED

    Yes; Red LED

    • for module diagnostics

    Yes; Red LED

    Yes; Red LED

    Potential separation

    Potential separation channels

    • between the channels and the backplane bus

    Yes

    Yes

    Isolation

    Isolation checked with

    707 V DC (type test)

    707 V DC (type test)

    Ambient conditions

    Ambient temperature in operation

    • horizontal installation, min.

    -25 °C; = Tmin

    -40 °C; = Tmin; startup @ -25 °C

    • horizontal installation, max.

    70 °C; = Tmax; > +60 °C max. 4x ±10 V permissible

    70 °C; = Tmax; > +60 °C max. 4x ±10 V permissible

    • vertical installation, min.

    -25 °C; = Tmin

    -40 °C; = Tmin; startup @ -25 °C

    • vertical installation, max.

    40 °C; = Tmax

    40 °C; = Tmax

    Extended ambient conditions

    • Relative to ambient temperature-atmospheric pressure-installation altitude

    Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

    Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

    Relative humidity

    • With condensation, tested in accordance with IEC 60068-2-38, max.

    100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

    100 %; RH incl. condensation/frost (no commissioning under condensation conditions)

    Resistance

    • against biologically active substances / conbity with EN 60721-3-3

    Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

    Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

    • against chemically active substances / conbity with EN 60721-3-3

    Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

    Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

    • against mechanically active substances / conbity with EN 60721-3-3

    Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

    Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!

    Decentralized operation

    Fast Startup supported

    Yes; 500 ms

    Yes; 500 ms

    Dimensions

    Width

    35 mm

    35 mm

    Height

    147 mm

    147 mm

    Depth

    129 mm

    129 mm

    Weights

    Weight, approx.

    310 g

    325 g


    SIPLUS S7-1500 AO 4XU/I ST -25 ... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7532-5HD00-0AB0 . ANALOG OUTPUT MODULE 16 BITS OF RESOLUTION, ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4; DIAGNOSIS, SUBSTITUTE VALUE INCL. INFEED ELEMENT, SHIELD CLAMP AND SHIELD TERMINAL
    SIPLUS S7-1500, ANALOG OUTPUT MODULE AQ 8 X U/I HS 16 BITS OF RESOLUTION, ACCURACY 0.3 %, 8CHANNELS IN GROUPS OF 8, DIAGNOSIS, SUBSTITUTE VALUE 8 CHANNELS IN 0.125 MS INCL. INFEED ELEMENT, SHIELD CLAMP AND SHIELD TERMINAL -40 ... +70 DEGREE C WITH CONFORMAL COATING BASED ON 6ES7532-5HF00-0AB0

     

在线询盘/留言
  • 免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,本网对此不承担任何保证责任。我们原则 上建议您选择本网高级会员或VIP会员。
    企业信息
    上海励辉自动化科技有限公司
    会员级别:金牌会员
    ------------ 联系方式 ------------
    联系人:向道高(先生)
    联系电话:021-60530963
    联系手机:13701945634
    传真号码:021-33737848
    企业邮箱:2880585007@qq.com
    网址:xiang981212.jdzj.com
    邮编:201600
    推荐供应
    0571-87774297