产品简介
美国NDT JAMES P-C-7300 粘结强度测试仪
美国NDT JAMES P-C-7300 粘结强度测试仪
产品价格：￥面议
上架日期：2017-06-17 13:42:59
产地：4
发货地：4
供应数量：不限
最少起订：14
浏览量：45
点击询价 QQ洽谈
资料下载：暂无资料下载
其他下载：暂无相关下载
详细说明

    美国NDT JAMES P-C-7300 粘结强度测试仪

    美国NDT JAMES P-C-7300 Bond Test MK III粘结强度测试仪可由直接拉脱的方法量度混凝土、沥青、磁砖、混凝土收复或其他表面物料的粘力或拉力。
     
    The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off b. By pulling a 25mm steel disk attached to the material under the unit can,
    1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
    2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
    3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface
    The James Bond Tester™ MK III  has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.
    Purchasing Notes
    • Each System comes with 10, 50mm 2 inch, ASTM Standard 1583 - 04  stainless steel disks
    • Customers who purchase this may also need the T-M-170 Moisture Master or T-HT-1000 Humitest for substrate moisture testing

    Features and Benefits

    ·         Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.
    ·         Calibrated gauge with maximum load indicator and mechanical damping.
    ·         Ball Joint Design for rapid testing as well as assuring direct tensile loading
    ·         Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.
    ·         Compact design.
    ·         Easy to use.
    ·         Standards
    o    ISO 4624 Paints and varnishes -- Pull-off test for adhesion
    o    EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate
    o    EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives
    o    BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests
    o    ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
    o    ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
    o    ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes
    o    DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)
    • Specifications:

    Gauge Specifications
    Range
    Increments
    Maximum Load Indicator
    Mechanical Dampened Movement
    Diameter
    0.2 KN / 50 lbf
    Yes
    Yes
    70 mm / 2.5"
    1.0 KN / 200 lbf
    Yes
    Yes
    70 mm / 2.5"

    Diameter
    Horizontal and Vertical Level
    Easy Thumb Screw Adjustment Knobs
    150 mm / 6"
    Yes
    Yes

    Bond Test Puller Assembly
    Diameter
    Height
    Maximum Load
    60 mm / 2.5"
    210mm / 8.125"
    30 KN / 6675 lbf

    Bond Test Assembly (Alignment Plate Attached to Bond Test Puller Assembly)
    Height
    Width
    Weight
    240 mm / 9.375"
    3010 mm / 12.5"
    5 Kg / 11 lbs.

    James Bond Tester™ MK III in Case
    Height
    Width
    Depth
    Weight
    410mm / 16"
    508mm / 20"
    205mm / 8"
    14 Kg / 31 lbs

在线询盘/留言
    • 免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责，本网对此不承担任何保证责任。我们原则 上建议您选择本网高级会员或VIP会员。
    企业信息
    北京康拉德机电科技有限公司
    会员级别：试用会员
    ------------ 联系方式 ------------
    联系人：陆工（）
    联系电话：185-11522039
    联系手机：18511522039
    传真号码：-
    企业邮箱：conrad15@163.com
    网址：dayuruanjian.jdzj.com
    邮编：100024
    企业网站
    进入商铺
    最新供应
    推荐供应
    0571-87774297