小型齒輪減速機尺寸表 Dimension of Small Gear Reducer
| MODEL：SV 立式減速機Vertical Type Reducer |
SV-A |  SV (B) |
|
||
尺寸表Dimension (m/m)
| 型號 Model No. |
馬達容量 Motor Capacity |
減速比 |
A | B | C | M | N | I | E | G | Y | X | L | V | 出力軸 output shaft |
重量 |
|||||
| D | S | W | T | U | |||||||||||||||||
| SV-A09 | 60KW 90KW |
1/3~1/230 1/3~1/100 (1/110~1/230) |
92 | 92 | 104 | 95 | 7 | - | 39.5 | 4.5 | 10.5 | 18 | 268 283 |
98 | 12 15 |
33 | 4 5 |
4 5 |
9.5 12 |
4 |  |
| SV-A10 | 0.1KW 1/8HPx4P 0.2KW 1/4HPx4P |
1/3~1/50(1/60~1/100) 1/3~1/30 (1/40~1/60) |
122 | 122 | 140 | 100 110 |
9 |
- | 33 | - | 10 | 17 | 285 290 |
119 133 |
18 | 30 | 5 | 5 | 15 | 5 | |
| SV-B10 | 0.1KW 1/8HPx4P 0.2KW 1/4HPx4P |
1/3~1/50(1/60~1/100) 1/3~1/30 (1/40~1/60) |
158 | 158 | 170 | 100 | 9 | 120 | 36 | 3 | 10 | 17 | 285 290 |
119 133 |
18 | 30 | 5 | 5 | 15 | 5 8 |
|
| SV-A11 | 0.1KW 1/8HPx4P 0.2KW 1/4HPx4P 0.4KW 1/2HPx4P |
1/60~1/200 1/40~1/90 (1/100~1/120) 1/3~1/30(1/40~1/60) |
145 | 145 | 170 | 100 110 115 |
11 | - | 46 | 4 | 12 | 18 | 300 315 320 |
119 133 147 |
22 | 40 | 7 | 7 | 18 | 7 10 12 |
|
| SV-11 | 0.1KW 1/8HPx4P 0.2KW 1/4HPx4P 0.4KW 1/2HPx4P |
1/60~1/200 1/40~1/90 (1/100~1/120) 1/3~1/30 (1/40~1/60) |
174 | 174 | 185 | 100 110 115 |
11 | 140 | 50 | 4 | 12 | 18 | 300 315 320 |
119 133 147 |
22 | 40 | 7 | 7 | 18 | 7 10 12 |
|
| 12 | 0.2KW 1/4HPx4P 0.4KW 1/2HPx4P 0.7.5KW 1HPx4P 1.5KW 2HPx4P |
1/100~1/200 1/40~1/90(1/100~1/200) 1/3~1/30(1/40~1/60) (1/3~1/40) |
217 | 217 | 235 | 110 115 135 150 |
11 | 180 | 58 | 6 | 15 | 23 | 330 335 350 390 |
133 147 161 181 |
28 | 45 | 7 | 7 | 24 | 11 13 16 25 |
|
| 13 | 0.4KW 1/2HPx4P 2.2KW 3HPx4P |
1/100~1/200 1/3~1/25 |
250 |
250 |
280 |
115 150 |
13 |
220 |
66 |
5 |
17 |
26 |
365 455 |
147 181 |
32 |
55 |
10 |
8 |
27 |
16 28 |
|
| 14 | 0.7.5KW 1HPx4P 1.5KW 2HPx4P 2.2KW 3HPx4P |
1/100~1/200 1/60~1/100(1/125~1/170) 1/30~1/50(1/60~1/100) |
260 | 276 | 310 | 135 150 150 |
18 | 230 | 77 | 5 | 20 | 28 | 425 460 500 |
161 181 181 |
40 | 65 | 10 | 8 | 35 | 44 46 46 |
|
註1)表中( )內數字係表示輕荷重使用。
2)表中重量以配合三相馬達為主，其它單相、剎車、直流、特殊等馬達重量另訂。
3)表中"L"內數字以三相為主，剎車及其它特殊馬達另訂。
4)馬達單頻，單雙電壓依設計所須另訂。
5)以上數值若有變更，恕不另行通知。
NOTES:
(1) Values shown in parenthesis ( ) are used for light loading.
(2) Weights shown in the above chart are based on 3-phase, motors, weights for single phase, brake, DC, or special motor shall be referred to specific values.
(3) Values shown in "I." column are based on 3-hase, brake for other special motor refer to specific values.
(4) When the need arises to determine the special voltage frequency for single phase, please contact the Li-Ming application engineering team.
(5) Above specifications are subject to change without prior notice.
