IQFlex|Litepoint|WIFI|WLAN测试仪|WIFI测试仪

品牌: 美国Litepoint

Testing WiFi in Manufacturing
In order to test WiFi during manufacturing you need to analyze a device’s transmitted signals, send precisely structured signals to the device’s receiver and check its response, then compare both transmitted and received characteristics against the appropriate 802.11x standard. You assume that the design is correct, so you are looking for manufacturing defects. The user interface should be very simple, and the test program should be designed for fastest speed with minimal “false” positive or negatives. LitePoint’s IQflex is designed for fastest deployment in production and fastest, most accurate, WiFi testing.

Testing Bluetooth in Manufacturing
Bluetooth is increasingly included in a range of devices from laptops to mobile phones. The LitePoint IQflex provides support with API based interfaces for testing of Bluetooth 1.0, 2.0, 2.1 and 3.0 devices. A full range of Bluetooth transmit and receive tests can be perbed. The multiple personalities of IQflex provides manufacturing-floor simplification and cost savings as WLAN and Bluetooth capabilities merge in consumer devices.专业销售、服务、租赁、维修!二手频谱，二手网分，二手示波器，二手综合测试仪，二手信号源，专业工程师指导/售后服务!!!!

   联系人：姚小姐：电话13510169620    QQ:1946418560    廖先生13590256385  QQ：785298834
IQflex® 802.11a/b/g/n Test Solution
You use LitePoint IQflex®, an all-in-one test instrument, for manufacturing testing of 802.11a/b/g/n WLAN products, such as network interface cards, access points and bded components. With the appropriate software option, IQflex can also be used to test Bluetooth-equipped devices.

IQflex integrates a vector signal analyzer (VSA) for analyzing device