ZJW泵@常州高压入料专用泵@高压入料专用泵安全稳定

(4) 滤布入料口及四周电石渣应当清理干净，以免造成入料不均，滤板两侧压力相差过大，会造成损坏。(5)保证吹气压力和时间。压滤机的整个清洗流程，大家了解吗，压滤机操作后会残留一点滤渣，为了不影响再一步的过滤操作，需要我们及时清理压滤机。总结出了压滤机清洗的整个流程，主要归纳为以下几点：首先要注意的是，在清洗之前，我们需要了解滤布过滤液的性质，从而选择想相应的清洗方法。

ZJW-11型压滤机专用入料泵的简述： ZJW-11型压滤机入料专用泵是一种性能特殊的杂质泵。近年来，被业内人士称之为"压滤机专用入料加压泵"。该泵由后侧面吸入浆液，简单的填料密封无泄漏，更重要的是其流量、扬程曲线很陡，非常适合一些特殊的工况。jdhuiquan4.12

ZJW泵@常州高压入料专用泵@高压入料专用泵安全稳定

Whatever the equipment, a good time to work in the state are more efficient, frame filter, too, the preparation conditions and beters are adjusted state, natural to achieve better sludge treatment effect. But for sludge treatment business experience with no frame filter, the adjustment to the sludge treatment effect we need to pay attention to details, from what aspects of it? The following filter manufacturers Cangzhou Yalong technical engineers made some conclusions frame filter adjustment.

ZJW-11型压滤机专用入料泵的特点：

  1、水力设计、结构设计先进新颖、效率高、搞磨蚀、运行平稳可靠；

  2、前期入料流量大、压力低；

  3、后期压榨流量小、压力高；

  4、轴密封简单可靠，不注水、不用机械密封、无泄漏；

  5、压滤入料不用变频调速，输送浓度高。

ZJW泵@常州高压入料专用泵@高压入料专用泵安全稳定

Filter plate and frame filter cloth near the contact nip portion should ensure a flat, wrinkle does not occur, the filter cloth is bed is pressed to prevent damage to or mud leak filter plate. Long tail extending into the snap ring to prevent or nip where the filter plate and filter cloth is damaged, or a leak to b a slurry, should be cut short tail. When frame filter means, or should be noted that no foreign matter larger sludge particles between the filter plate and filter cloth, foreign matter or larger sludge particles when the laminate may b a filter plate or damaged filter cloth.

 ZJW-II型压滤机专用入料泵性能参数表：

炉前剖析选用直读光谱仪，快速，的把握资料成份的度，结合先进的铸造工艺，浇注工艺，热处理工艺。在确保铸件资料原料配比正确的一起，可以使铸件表面光洁，铸件内部安排细密。