ZJW泵@苏州污泥处理脱水泵@污泥处理脱水泵终身维护

(1)选择适用于电石渣过滤材质的滤布，滤布需保证断裂，径向，纬向伸张率和透气度。(2) 滤布放置平整，无折叠起皱现象，无破漏，边沿伸出滤板之外，绳带要扎好，无沉积的电石渣。(3) 定期清洗滤布，视使用情况作出规定。

ZJW-11型压滤机专用入料泵的简述： ZJW-11型压滤机入料专用泵是一种性能特殊的杂质泵。近年来，被业内人士称之为"压滤机专用入料加压泵"。该泵由后侧面吸入浆液，简单的填料密封无泄漏，更重要的是其流量、扬程曲线很陡，非常适合一些特殊的工况。jdhuiquan4.12

ZJW泵@苏州污泥处理脱水泵@污泥处理脱水泵终身维护

Whatever the equipment, a good time to work in the state are more efficient, frame filter, too, the preparation conditions and beters are adjusted state, natural to achieve better sludge treatment effect. But for sludge treatment business experience with no frame filter, the adjustment to the sludge treatment effect we need to pay attention to details, from what aspects of it? The following filter manufacturers Cangzhou Yalong technical engineers made some conclusions frame filter adjustment.

ZJW-11型压滤机专用入料泵的特点：

  1、水力设计、结构设计先进新颖、效率高、搞磨蚀、运行平稳可靠；

  2、前期入料流量大、压力低；

  3、后期压榨流量小、压力高；

  4、轴密封简单可靠，不注水、不用机械密封、无泄漏；

  5、压滤入料不用变频调速，输送浓度高。

ZJW泵@苏州污泥处理脱水泵@污泥处理脱水泵终身维护

(1) Select the appropriate filtering cloth carbide slag material, cloth need to ensure breaking strength, radial, and weft Elongation air permeability. (2) The cloth is placed flat, wrinkle-free folding, without leaking, protruding beyond the edge of the filter plate, tied to the cord, no carbide slag deb. (3) regular cleaning cloth, depending on usage provided for. (4) and around the cloth feed inlet carbide slag should be clean, to avoid uneven feed, the pressure difference on both sides of the filtration plate is too large, it will cause damage. (5) to ensure insufflation pressure and time.

 ZJW-II型压滤机专用入料泵性能参数表：

可以使铸件表面光洁，铸件内部安排细密。 占地面积15000平方米。年产渣浆泵高铬金铸件2000吨，渣浆泵，砂砾泵，脱硫泵，泥浆泵整机3000台。口径规模25-1400mm。