节能离心泵@柏乡县节能离心泵@节能离心泵200S95

Thus the centrifugal force is generated, under the b of centrifugal force, the liquid is dumped along the Blade Runner to the impeller outlet, and the liquid is collected and fed into the discharge tube through the worm shell. The liquid obtains energy from the impeller, increasing the pressure energy and speed energy, and relies on this energy to transport the liquid to the place of work. When an impeller does not allow the liquid to obtain sufficient energy, multiple impellers can be used in series or in parallel to work on the fluid. At the same time that the liquid is dumped to the impeller outlet, a low pressure is bed at the center of the impeller Inlet, and the pressure difference is generated between the liquid in the suction tank and the center of the impeller, and the liquid in the suction tank is continuously operated into the impeller under the b of this pressure difference. In this way, the impeller in the rotation process, one side of the constant liquid, while constantly giving the liquid with a certain amount of energy, the liquid discharge, so that the centrifugal pump work continuously. The medium-open pump is mainly composed of pump body, pump cover, sealing ring and rotor parts. Rotor parts are mainly composed of shafts and impeller mounted on the shaft, impeller retaining sleeve.

S、SH单级双吸中开式离心泵产品特点1、密封系统：可供选用的机械密封、填料密封其冷却润滑均采用内循环；2、流量大、效率高：双吸叶轮，具有流量大、效率高等特点；3、可更换的轴套：轴套作为易损件，起到保护轴，提高泵的使用寿命；4、密封环：密封环作为易损件，起到提高泵的效率、延长泵的使用寿命的特点。S、SH单级双吸中开式离心泵产品用途

节能离心泵@柏乡县节能离心泵@节能离心泵200S95

To bring it into line with the principles of economy, safety and application. The reliable operation of the medium-open pump determines the normal operation of the industrial production system, we can also assist in the operation of the pump in a series of things. In the operation of the medium-open pump by perbance differentiation into three data, small flow and high lift, medium flow and medium lift, large flow and large lift. It should be noted that in these three kinds of perbance, to avoid the pump long-term operation under small flow and large lift, so that the pump will produce a vortex, vortex will produce a large thrust, so that the shaft bending deflection is too large, not conducive to continuous operation. In the rotating component lubrication efforts, the rotary components of the pump have bearings, shafts and other bs, to ensure their lubrication, regular inspection of lubricants, check the amount of oil, oil can not be too little, not too much, oil quality is also very important, when the oil spoilage to be replaced in a timely manner. The pump group for planning management, the operation of the pump and maintenance of the installation rules and regulations, so that the temperature is not exceeded, the speed of operation is not speeding.

S、SH单级双吸中开式离心泵概述