M.2 接口，又称为NGFF (Next Generation Form Factor)，比起mPCIe 可节省高达40%的使用空间，可完美嵌入各种超薄、精巧的系统配置。
Innodisk M.2 (S42) 3SE3 is designed as the standard M.2 b factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent perbance. The b factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE3 absoluby replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S42) 3SE3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
| Model Name | M.2 (S42) 3SE3 |
| Interface | SATA III 6.0 Gb/s |
| Flash Type | SLC |
| Capacity | 4GB~32GB |
| Max. Channels | 2 |
| Sequential R/W (MB/sec, max.) | 210/110 |
| Max. Power Consumption | 1.2 W (3.3V x 366 mA ) |
| Thermal Sensor | ST- Optional / WT- Default |
| H/W Write Protect | N |
| ATA Security | Y |
| S.M.A.R.T. | Y |
| Dimension (WxLxH/mm) | 22.0 X 42.0 X 3.5 |
| Vibration | 20G@7~2000Hz |
| Shock | 1500G@0.5ms |
| MTBF | >3 million hours |
| Storage Temperature | -55°C ~ +95°C |
| Operation Temperature |
Standard Grade: 0°C ~ +70°C; Industrial Grade: -40°C ~ +85°C |
| Operation Temp. | 4GB | 8GB | 16GB | 32GB |
|
Standard Grade (0°C ~ +70°C) | DEM24-04GD09SCADB | DEM24-08GD09SCADB | DEM24-16GD09SCADB | DEM24-32GD09SCADB |
|
Industrial Grade (-40°C ~ +85°C) | DEM24-04GD09SWADB | DEM24-08GD09SWADB | DEM24-16GD09SWADB | DEM24-32GD09SWADB |
| Operation Temp. | 4GB | 8GB | 16GB | 32GB |
|
Standard Grade (0°C ~ +70°C) | DEM24-04GD09SCADB | DEM24-08GD09SCADB | DEM24-16GD09SCADB | DEM24-32GD09SCADB |
|
Industrial Grade (-40°C ~ +85°C) | DEM24-04GD09SWADB | DEM24-08GD09SWADB | DEM24-16GD09SWADB | DEM24-32GD09SWADB |
