伍德沃德Woodward 5009容错控制器专为要求高可靠性的关键汽轮机控制而设计。它可配置为纯凝、背压或单抽/补汽等透平应用。5009的CPU 和I/O (TMR)均为三冗余形式，以满足工业透平市场对可靠性的要求。500为现地可编程模式，采用菜单式软件指引工程师根据发电或机械驱动的应用进行编程。5009 可独立工作或与工厂DCS结合使用。

伍德沃德.woodward505/505E(9907-162,9907-164,9907-165,9907-167)数字式控制器可用于控制工业汽轮机、小电网涡轮发电机或透平膨胀机。

伍德沃德.woodward2301A 控制器9905 系列应用于柴油机、汽油机、汽轮机或燃气机等驱动的发电机组的速度及负荷分配控制。2310ALSSC控制器可以工作在恶劣环境下。

伍德沃德基于微处理器控制，内部软件专门为单阀蒸汽轮机控制而设计。为方便控制器的换型，的接线端口的排列布置与2301A一类的控制器基本一致。控制器可完成小型蒸汽轮机系统的核心控制。其内部的应用软件为现场可编程形式，以适应不同的配置需要。由于功能的增强，并且配备了一个通讯串口，大大方便了控制器与PLC或DCS集散控制系统之间的通讯。

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

主营产品，备件供应，充足库存

Foxboro（福克斯波罗）：I/A Series系统，FBM全系列（现场输入/输出模块）

顺序控制、梯形逻辑控制、事故追忆处理、数模转换、输入/输出信号处理、

数据通信及处理等。

Westinghouse（西屋）：1C31系列DCS系统、CPU、OVATION系统、WDPF系统、

WEStation系统备件。

Triconex（英维思）:冗余容错控制系统、基于三重模件冗余（TMR）结构的现代化的容错控制器。

EMERSON（艾默生）:模块、卡件、驱动器等各类备件。

XYCOM：XVME系列

Bently（本特利）：3500/3300系统。

Rockwell（罗克韦尔）：ICS系统。

ABB：PM全系列DCS系统、IGCT高压变频器系列、工业机器人备件DSQC系列、INFI 90等。

Bailey（贝利）：BRC系列DCS系统等。

Allen-Bradley：1756、1785、1771、1746全系列系统等。

Yokogawa（横河）：CP系列等。

Honeywell（霍尼韦尔）：TK/TC/CC系统等。

Reliance（瑞恩）：57C系列等。

Schneider（施耐德）：140系列处理器、控制卡、电源模块等。

Modicon（莫迪康）：AS系列PLC系统备件。

Siemens(西门子)：6ES5/6ES7414/6ES7415/6ES7416系列PLC系统备件、

Siemens MOORE，Siemens Simatic C1，Siemens数控系统等。

Motorola（摩托罗拉）：MVME 162、MVME 167、MVME1772、MVME177等系列。

XYCOM：I/O、VME板和处理器等。

GE（通用电气）：IC698/IC697全系列PLC系统、模块、卡件、驱动器等各类备件。

Yaskawa（安川）：伺服控制器、伺服马达、伺服驱动器。

Bosch Rexroth（博世力士乐）：Indramat，I/O模块,PLC控制器,驱动模块等。

Woodward（伍德沃德）：SPC阀位控制器、PEAK150数字控制器。

How to choose between PLC and DCS depends on the specific project and plant type. Because of different applications, the requirements of the control system are also different.

In addition to some basic criteria, we must also consider the installation, scalability, maintenance and other factors. Sometimes, one choice is very suitable for a factory, and in another case it may not be. Therefore, the more factors considered in the selection of control system, the more conducive to the realization of short-term and long-term goals.

At present, although PLC system may be the most cost-effective for small equipment, DCS system provides more economical scalability and is more likely to obtain higher initial return on investment.

PLC is suitable for discrete production, generally composed of separate production devices, mainly used to complete the assembly of components, such as labeling, filling or grinding. DCS is suitable for process manufacturing. Automated systems are often used to produce by recipe rather than by piece in a continuous and batch manner. Large scale continuous processing equipment, such as refineries and chemical plants, all use DCS system. Mixed application usually uses PLC and DCS at the same time.

■ process scale:

Small system (<300 i / o points) may have less budget, so plc is more suitable. dcs has a b database, which is easier to manage and upgrade, and can play a more important role in large factory applications.

■ upgrade plan:

PLC system can be selected for small-scale industrial process, but if the process needs to be expanded or upgraded, more PLC hardware and database need to be added, and independent maintenance is needed. This process is time-consuming and laborious, and prone to errors. At this time, DCS is more suitable. As DCS is easier to upgrade, it can also manage users&＃39; trust from the central hub, so it is easier for later maintenance.

Integration requirements:

For stand-alone device, PLC is the ideal choice. When the factory configures multiple PLCs, it will produce the requirement of interconnection. This is generally difficult to implement because it is usually necessary to map data using communication protocols. Especially when the user needs to change, once a PLC system is changed, the two PLCs may not communicate normally. DCS does not need mapping, configuration change is just a simple process, the controller is the system&＃39;s own.

专注，诚信、高效、共赢、 我们专注于工业自动化产品销售庞大库存等您询价直接从工厂和欧洲经销商拿货，省去中间环节，给您提供更优势

更多相关库存型号：

WOODWARD 9907-1349 CPC-II 执行转换器
WOODWARD 9907-1228 CPC-II 执行转换器
WOODWARD 9907-1200 CPC-II 执行转换器
WOODWARD 9907-1199 CPC-II 执行转换器
WOODWARD 9907-1198 CPC-II 执行转换器
WOODWARD 9907-1197 CPC-II 执行转换器
woodward 9907-018 负载速度数字控制器
WOODWARD 9905-973 数字控制器
woodward 8446-1019 507D/E汽轮机数字控制器
woodward 8444-1067 506D/E汽轮机数字控制器
woodward 8200-1302 505D/E汽轮机数字控制器
woodward 5501-471 控制器卡
woodward 5501-470 控制器卡
woodward 5501-467 控制器卡
woodward 5466-409 控制器卡
WOODWARD 5466-316 控制器卡
WOODWARD 5466-258 控制器卡
WOODWARD 5464-414 控制器卡