GJQ－105 电离式火焰监测器主要用于燃气工业燃烧器的火焰监测。检测性能可靠，可

以排除积炭、布线分布电容的影响，只对火焰敏感，对高温无反应，具有强抗干扰性能。

················································································································

一、功能：

控制点火装置自动点火，点火时自动打开燃料阀，在设定时间内没有点燃，控制器自动关闭

燃料阀并报警，如点火成功则保持燃料正常供应。

·····················································································································

二、主要技术指标

1.电源电压 220V    ±10%     50/60HZ

2.火焰检测     电离电极

3.检测响应时间≤0.2 秒

4.电极使用温度     长期 1300℃

5.探头与监测器连接距离     ≤100 米

···························································································································

三、壳体 ABS 工程塑料

1.体积 155×90×55mm、不包括插头尺寸

2.安装尺寸 135×52mm 安装孔Φ4－Φ5 mm

···························································································································

四、检测电极 pyromax 高温合金

1.直径Φ12    伸入火区Φ4

2.安装螺纹 M14×1.25

3.安装检测电极必须能接触到火焰，检测孔Φ12.5mm，电极长期工作温度 1300℃，不需冷却。