|
ENiCrFe-7 is used for welding nickel-chromium-iron alloy 690 (UNS N06690)to themselves. | ||||||
| It may also be utilized for welding NICRFE alloys to steels and stainless steels as well as for | ||||||
| corrosion resistant overlays on steel. |
| CLASSIFICATIONS: | ||||||
| ENiCrFe-7 | ||||||
| AWS A5.11 | ||||||
| ASME SFA 5.11 | ||||||
| UNS W86152 | ||||||
| APPLICATIONS: | ||||||
| All b ENiCrFe-7 the higher chromium level required for stress-corrosion cracking- | ||||||
| resistance in the critical pure water environments of nub power generation facilities. | ||||||
| . | ||||||
| DIAMETERS: | ||||||
| 3/32'',1/8'', | ||||||
| 5/32'',3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| Tensile Strength (psi) 80,000 | ||||||
| Percent Elongation 30 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.03 | 0.40 | 0.001 | 0.001 | 0.23 | 58.50 | |
| Cr | Fe | Ti | Cb+Ta | |||
| 29.90 | 9.60 | 0.40 | 0.47 | |||
