|
ENiCrMo-3, a high nickel electrode,is used for welding nickel-chromium-molybdenum alloys | ||||||
| to themselves and to steel. It is also suitable for welding 5 percent and 9 percent nickel steels | ||||||
| for low temperature service to themselves as well as to low alloys or stainless steel. |
| ENiCrMo-3 has moderate strength, good fabricability and exception corrosion resistance from | ||||||
| cryogenic to elevated (up to 1800°F). This electrode resists corrosive attack and is virtually | ||||||
| immune to chloride-ion stress-corrosion cracking. | ||||||
| CLASSIFICATIONS: | ||||||
| ENiCrMo-3 | ||||||
| AWS A5.11 | ||||||
| ASME SFA 5.11 | ||||||
| UNS W86112 | ||||||
| APPROVALS: | ||||||
| MIL-E-22200/3 | ||||||
| APPLICATIONS: | ||||||
| ENiCrMo-3 is used to join NICRMO alloys such as 625, 800, 801 and 600.It is utilized for | ||||||
| welding piping systems and reactor components in the power generation industry and for | ||||||
| high temperature service in an array of other engineering applications including | ||||||
| petrochemical plants and furnace equipment.This versatile wire is excellent for overlaying on | ||||||
| steel where exceptional corrosion resistance is required,such as chloride contaminated | ||||||
| cooling water in heat exchangers,as well as offshore and marine environments. | ||||||
| DIAMETERS: | ||||||
| 3/32'',1/8'', | ||||||
| 5/32'',3/16'' | ||||||
| TYPICAL | ||||||
| MECHANICAL PROPERTIES: | ||||||
| Tensile Strength (psi) 11,200 | ||||||
| Percent Elongation 35 | ||||||
| TYPICAL | ||||||
| CHEMICAL COMPOSITION: | ||||||
| C | Mn | P | S | Si | Ni | |
| 0.03 | 0.27 | 0.01 | 0.01 | 0.49 | 64.20 | |
| Cr | Mo | Cu | ||||
| 21.30 | 8.40 | 0.07 | ||||
