JUGITEC BOSCH灌装线手套 EPDM RABS手套

认准：

颢泰在中国10年只专注手套

JUGITEC - 品牌简介

JUGITEC是JUNG?GUMMITECHNIK?GmbH公司旗下的橡胶手套系列品牌。JUNG?GUMMITECHNIK?GmbH是一家经过认证的高品质橡胶产品生产商，总部位于莱茵-美因内卡大都会地区。产品组合主要包括软管，模制零件和防护手套。此类橡胶制品可以承受极压，负压，磨损和温度条件，并暴露于强碱、强酸等腐蚀性介质中。

材料特性

温度范围： － 20 ℃ ～＋ 120℃

抗臭氧和抗气候性

抗多种氧化化学制剂

高气密性

化学特性

根据DIN EN 374-3:2003

化学试剂 防护指数

A 甲醇 6 gt; 480min）

K 丙酮 6 gt; 480min）

L 40 6 gt; 480min）

机械性能

根据DIN EN 388:2003

耐磨性 防护度2

耐切割性 防护度0

耐撕裂性 防护度1

耐穿刺性 防护度0

全新认证全新标识，CE0299

颢泰专注，全心服务，现货直销

特点和优点

?出色的抗磨损性能

?和氧化物

?自然柔软，舒适

?颢泰商贸干箱手套！

JUGITEC手套7BL04-250F?此款符合FDA

耐磨性能好，抗臭氧和氧化化学品性能好，柔软舒适，袖口卷边厚度为4.8mm，可方便与手套箱连接。多次浸渍工艺生产。

Inbation sheet according to DIN EN 420: General requirements for gloves

Penetration (penetrability) according DIN EN ISO 374-2: 2015: passed

Penetration resistance was assessed under laboratory conditions and applies only to the samples tested.

Degradation according DIN EN ISO 374-4: 2014:

Remark: No visually noticeable changes or degradation on the tested areas of the cuff and palm

Protection against microorganism according DIN EN ISO 374-5: 2017: passed

Glove for protection against bacteria, fungal infection and viruses.

Penetration resistance was assessed under laboratory conditions and applies only to the samples tested.

Mechanical characteristics according DIN EN 388:2017 (European Standard)

Perbance level:

The perbance levels for the respective pictogram or for the respective test standard are listed, where:

0: indicates that the glove passed the minimum perbance level for a given single hazard;

X: indicates that the test is inapplicable due to glove material or glove design for this glove.

Further inbation on the perbance levels can be found in the corresponding valid standard.

The protective gloves comply with the PPE VO (EU) 2016/425.

The EU Declaration of Conbity is available at: www.jung-gt.de and www.jugitec.de.