焊接最小屈服强度680 N/mm2钢种（如NAXTRA 70、T1、80 HLES、HY80和HY100）焊条熔敷率达120%的全位置碱性直流/交流焊条。通常配合FILARC 98使用，后者用于点焊、根部焊道焊接和立角焊缝焊接。 尽可能使用最短的电弧。摆动速度尽量较慢。立角焊缝可使用轻微摆动。 DC+。根部焊道使用DC-。
| As welded | |||
| Elongation | Tensile Strength | Yield Strength | 保护气体 |
| 22 % | 800 MPa | 740 MPa | ISO |
| - | - | - | AWS |
| As welded | ||
| Impact Value | Testing Temperature | 保护气体 |
| 80 J | -50 °C | ISO |
| - | -50 °C | AWS |
| Mn | |||||
| Mn | Mo | C | Si | Ni | Cr |
| 1.65 % | - | - | - | - | - |
| Mo | |||||
| Mn | Mo | C | Si | Ni | Cr |
| - | 0.44 % | - | - | - | - |
| C | |||||
| Mn | Mo | C | Si | Ni | Cr |
| - | - | 0.06 % | - | - | - |
| Si | |||||
| Mn | Mo | C | Si | Ni | Cr |
| - | - | - | 0.32 % | - | - |
| Ni | |||||
| Mn | Mo | C | Si | Ni | Cr |
| - | - | - | - | 2.27 % | - |
| Cr | |||||
| Mn | Mo | C | Si | Ni | Cr |
| - | - | - | - | - | 0.06 % |
| Fusion time per electrode at 90% I max | kg weld bl/kg electrodes | Number of electrodes/kg weld bl | 安培 | 熔敷率 | 电压 V | 直径 |
| 46.6 sec | 0.61 kg | 83.3 | 55-105 A | 0.93 kg/h | 25.3 V | 2.5 x 350 mm |
| 64.3 sec | 0.56 kg | 46.2 | 90-140 A | 1.21 kg/h | 22.8 V | 3.2 x 350 mm |
| 90.0 sec | 0.61 kg | 23.1 | 110-180 A | 1.72 kg/h | 22.8 V | 4.0 x 450 mm |
| 90.3 sec | 0.63 kg | 13.5 | 190-280 A | 2.75 kg/h | 24.6 V | 5.0 x 450 mm |
