CN8592-DC1-DC2详细介绍

CN8592-DC1-DC2

过程控制器
CN8590 Series
3年保修 CE OmegaCare
过程控制器
CN8590 Series:过程控制器

用户可选择的通用输入：热电偶，热电阻，电压，或电流
PID参数自整定，热或冷的
无扰自动/手动转移
可配置的双加热或冷却输出
继电器，直流脉冲，或可控硅输出选项
可编程过程和偏差报警（正常和闭锁）
报警抑制模式
NEMA 4X（IP65）防尘和防溅的前面板
精度：±0.2% FS，±1位数

该cn8590是1 / 32 DIN基于微处理器的控制器，提供对温度等过程变量的精确的闭环控制。按需自动调谐，和开/关通过PID功能的完整，cn8590接受输入从K，J型热电偶和RTD的或线性的信号。标准功能包括一个大型易于阅读的LED显示，双输出，场可选输入，过程或偏差的高/低报警，无扰切换手动/自动转换。打开/关闭输出滞后是可调的，单位可以很容易地配置在外地的显示过程值，偏差或输出百分比。

规格：
Perbance
Accuracy: ±0.2% of FS, ±1 Digit
Display Resolution Selectable: 0.1, 0.01 for process bs, 1.0 for thermocouple bs, 0.1, 1.0 for RTD bs.
Setpoint Resolution: 1 count/0.1 count
Repeatability: ±1.0 count
Temperature Stability: 5 .V/°C maximum
T/C Cold End Tracking: 0.05°C/°C ambient
Noise Rejection: Common mode >100 dB, Series mode >70 dB
Sampling Frequency: 3.7 Hz (270 ms) Operating Limits
Line Voltage Line Power: 85 to 265 Volts, 50/60 Hz,
Power Consumption: Less than 6 VA (Instrument)

Control Characteristics
Setpoint Limits: User Configurable
Alarms: Adjustable for high low process or deviation
Rate (Derivative): 0 to 2400 sec
Reset (Integral): 0 to 9600 sec
Cycle Time: 0.3 to 120 sec
Proportional Band: 1 to FS
Deadband: 1 to FS
Control Hysteresis: 1 to FS
Autotune: Operator-initiated from front panel
Manual Control: Operator-initiated from front panel

Inputs
Thermocouple: J, K and T, maximum lead resistance 100 ohms
RTD: Platinum 100 ohm at 0 Degrees C, DIN curve 0.00385.
Process Inputs: Linear current and voltage
Engineering Units: -1999 to 9999

Output Options
SPST Relay: 5 Amps @ 120 Vac , 5 Amps @ 240 Vac
dc Pulse: 5 Vdc pulsed
SSR: Solid-State Relay, 120/240 Vac, zero Voltage switched 1 Amp continuous 10 Amp surge @ 25°C.

General
Display: LED 4-Digit, 10 mm
Display Indicators: 7-Segment LED Alphanumeric
Dimensions: 48 mm (1.890") x 23.97 mm , (0.944") x 99.99 mm (3.937")
Panel Cutout: 45 mm (1.772") x 22.19 mm (0.874")
Front Panel Rating: NEMA 4X
Operating Temperature: 0 to 55°C (32 to 131°F)
Humidity Tolerances: 90% R.H. maximum, non-condensing
Weight: 90.7 g (3.2 oz)

Panel Mount Components

Panel Mounting and Controller

Universal Input Types and Ranges
Input Type Range Resolution
TC J
Iron-Constantan -100 to 760°C
-148 to 1400°F 1°C
1°F
K
CHROMEGA?-ALOMEGA? -140 to 1350°C
-220 to 2462°F 1°C
1°F
T
Copper-Constantan -130 to 400°C
-202 to 752°F 1°C
1°F
RTD RTD
2-wire, 100Ω Pt -200 to 850°C
-328 to 1562°F 1°C
1°F
RTD
2-wire, 100Ω Pt -128.8 to 200.0°C
-199.0 to 392.0°F 0.1°C
0.1°F
MV 10 to 50 mV
0 to 50 mV Scalable (-1999 to +9999)
Scalable (-1999 to +9999) Selectable
Selectable
*MA 4 to 20 mA
0 to 20 mA Scalable (-1999 to +9999)
Scalable (-1999 to +9999) Selectable
Selectable
* Note for mA Input, connect external 2.5 ohm resistor across signal b terminals.
 

产品型号  产品描述


CN8592-R1-DC2
1/32 DIN controller with one relay, one dc pulse output and 85 to 265 Vac power


CN8592-R1-T2
1/32 DIN controller with one relay, one ac SSR output and 85 to 265 Vac power


CN8592-DC1-T2
1/32 DIN controller with one dc pulse, one ac SSR output and 85 to 265 Vac power


CN8592-T1-DC2
1/32 DIN controller with ac SSR, one dc pulse output and 85 to 265 Vac power


CN8592-T1-T2
1/32 DIN controller with dual ac SSR outputs and 85 to 265 Vac power 

CN8592-DC1-DC2

CN8592-DC1-DC2 相关产品

CN8592-DC1-DC2 技术文章