产品简介
DPITH-I32-5-C24-DC
DPITH-I32-5-C24-DC
产品价格:¥1000
上架日期:2017-09-26 14:37:32
产地:美国OMEGA
发货地:深圳
供应数量:不限
最少起订:1件
浏览量:55
资料下载:暂无资料下载
其他下载:暂无相关下载
详细说明

    DPITH-I32-5-C24-DC详细介绍

    DPITH-I32-5-C24-DC

    iSeries湿度和温度控制器
    CNiTH and DPiTH Series
    iSeries湿度和温度控制器

    输出1湿度
    输出2温度
    高精度±0.5°C和±2%相对湿度
    4受欢迎的DIN尺寸
    以太网和串行通信(可选)
    用户友好,简单的配置
    全自动调谐PID控制
    选择继电器,固态继电器,直流脉冲,模拟电压或电流
    可编程的斜坡和浸泡的湿度和/或温度
    相对湿度/温度探头包括
    欧米茄?i系列仪表监测和控制温度和相对湿度。系列中的所有仪表和控制器是高质量,高精度的仪器具有欧米茄的获奖系列技术,不妥协的准确性,通过扩展的5年保修支持。
    该仪器是简单的配置和使用,同时提供了巨大的多样性和丰富强大的功能。
    i系列仪表可以作为显示器或控制器。监视器是非常准确的可编程数字面板表显示湿度,温度,或露点。该控制器还提供单独的输出控制湿度和温度,是任何控制或报警的要求,从简单的开关全自动调谐PID控制易于编程。
    米和控制器与家庭四真正的DIN尺寸可供选择:超紧凑的1 / 32 DIN;中型流行1 / 16 DIN平方挡板双显示;1 / 8 DIN垂直,与1 / 8 DIN水平与明亮的大21毫米的数字。
    i系列LED显示器可以通过编程改变之间的绿色,琥珀色,红色在任何给定值或报警点。
    与控制器的模型提供一个选择的几乎任何组合2控制或报警输出:固态继电器(SSR);形成“C”SPDT(单刀双掷)继电器;与外部的SSR脉冲10 VDC输出使用;或模拟过程中的值的控制或重传输出选择。
    选择网络和通信(强烈推荐)包括一个嵌入式Web服务器直接以太网局域网连接,串行通信。C24串行通信选项包括RS232和RS485。协议包括Modbus?和一个简单的ASCII协议。该c4eit选项包括以太网、RS485 MODBUS ASCII /在一个装置。
    i系列仪表和控制器的设计与流行的工业自动化易于集成,数据采集与控制程序以及微软的Visual Basic和Excel。欧米茄提供免费的组态软件,使快速和容易启动和运行。可以在网上下载。

    规格:
    Control
    Action: Reverse (heat) or direct (cool)
    Modes: Time and amplitude proportional control modes; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative with anti-reset windup and ON/OFF
    Rate: 0 to 399.9 seconds
    Reset: 0 to 3999 seconds
    Cycle Time: 1 to 199 seconds; set to 0 for ON/OFF operation
    Gain: 0.5 to 100% of span; setpoints 1 or 2
    Damping: 0000 to 0008
    Soak: 00.00 to 99.59 (HH:MM), or OFF
    Ramp to Setpoint: 00.00 to 99.59 (HH:MM), or OFF
    Autotune: Operator initiated from front panel for 1 b at a time only

    Outputs
    There are two physical outputs: Output 1 = RH, Output 2 = Temp
    Functions are set up as Outputs (PID or ON/OFF), or Alarms
    Ordering output choices:
    Relay: 250 Vac @ 3A or 30 Vdc @ 3A (resistive load); Form C SPDT
    SSR: 20 to 265 Vac @ 0.05 - 0.5A (resistive load); continuous
    DC Pulse: Non-Isolated; 10 Vdc @ 20 mA (used with external SSR)
    Analog Output (Output 1 only): Non-Isolated, control or retransmission 0 to 10 Vdc or 0 to 20 mA;
    500 ohm max, accuracy is ±1% of FS

    Control Output 1 and 2
    Operation:
    Action: Reverse (heat) or Direct (cool)
    Modes: Time and Amplitude Proportional Control Modes; selectable Manual or Auto PID, Proportional, Proportional with Integral, Proportional with Derivative with Anti-reset Windup and ON/OFF

    Alarm 1 and 2 (Programmable)
    1) Alarms are used for color changing sequence of alarm status (visual alarm).
    2) Alarm functions are active, in addition to the color changing functions, if Output 1 & 2 are (menu) disabled.
    3) If Alarms are disabled, Output menus (PID or ON/OFF) are active. Color change is still active.
    Operation: High/low, above/below, band, latch/unlatch, normally open/normally closed and process/deviation; front panel configurations
    -AL Limit Alarm Version: Output 1 & 2 submenus used for PID are eliminated from menu. Color sequence based on alarm setpoints is still available.

    Input
    Relative Humidity Accuracy/Range: ±2% for 10 to 90%; ±3% for 5 to 10% and 90 to 95% ±4% for 0 to 5% and 95 to 100%
    Hysteresis: ±1% RH
    Non-linearity: ±3%
    Temperature Accuracy/Range*:
    ±0.5°C for 5° to 45°C (±1°F for 41 to 113°F); up to ±1.5°C for -40° to 5°C and 45° to 124°C (up to ±2.7°F for -40° to 41°F and 113° to 255°F)
    Resolution: 0.1%, 12-bit for RH; 0.1°C, 14 bit for temperature
    Response Time: 8 seconds, tau 63% for RH; 5 to 30 seconds, tau 63% for temperature
    * Note: Extended temperature range is for industrial probe only, the controller’s operating temperature is 0 to 50°C.

    Network and Serial Communications (For Options -C24, -C4EIT, -EIT)
    Ethernet: Standards compliance IEEE 802.3 10Base-T
    Supported Protocols: TCP/IP, ARP, HTTPGET
    RS232/RS422/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 300 to 19.2 K baud; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured b value and status
    RS485: Addressable from 0 to 199
    Connection: Screw terminals

    General
    A/D Conversion: 12-bit RH and 14-bit temp
    Reading Rate: 2 samples per sec max
    Digital Filter: Programmable
    Decimal Selection: None, 0.1 for temp and humidity
    Display: 4-digit, 9-segment LED
    i32, i16D, i8DV: 10.2 mm (0.40")
    i8: 21 mm (0.83")
    i8DH: 10.2 mm (0.40") and 21 mm (0.83") GREEN, AMBER, and RED programmable colors for process variable, setpoint and temp units
    Operating Temperature: 0 to 50°C (32 to 122°F), 90% RH non-condensing
    Protection:
    i32, i16D: NEMA 4X (IP65) front bezel
    i8DH, i8DV: NEMA 1 (IP23) front bezel
    Power: Refer to ordering guide
    No CE compliance above 60 Hz.

    注释:
    1. Analog output (Option 5) is not available with "-AL" units.
    2. "-C4EIT" or "-EIT" option is not available on the 1/32 DIN. Refer to the iServer section for other Ethernet devices that can connect to a CNiTH-i32xx-x-C24.

    产品型号说明
    (1) (2) (3) (4) (5)
    CNiTH
    选项描述
    (1) Size
    选择
    -i8DH 代表 1/8 DIN Dual Display Horizontal
    -i8DV 代表 1/8 DIN Dual Display Vertical
    -i16D 代表 1/16 DIN Dual Display
    -i32 代表 1/32 DIN Single Display
    (2) Control Outputs
    选择
    22 代表 2 Solid State Relays SSR
    23 代表 SSR and Form C Relay
    24 代表 SSR and Pulse 10V dc
    33 代表 2 Relays - Form C Relay
    42 代表 Pulsed 10 V dc and SSR
    43 代表 Pulsed 10 V dc and Form C Relay
    44 代表 2 Pulsed 10 V dc
    52 代表 Analog Output and SSR
    53 代表 Analog output and Relay
    54 代表 Analog output and Pulse
    (3) RH/Temp Probe
    选择
    -2 代表 2 in. probe with 3ft cable
    -5 代表 5 in. probe with 10ft cable
    (4) Network Options
    选择
    Nothing(leave field blank) 代表 no Network Option|-C24 代表 Isolated RS232 and RS485
    -EIT 代表 Ethernet with Embedded Web Server
    -C4EIT 代表 Ethernet with Embedded Web Server + Isolated RS485/422
    (5) Power Supply
    选择
    Nothing(leave field blank) 代表 Standard power b 90-240Vac
    -DC 代表 Low Power option 12-36 Vdc/24 Vac CNiTH-i32 or 20-36 Vdc/24 Vac CNiTH-i8/i16
    注意: 并非所有组合都有效,请参见规格表上有效的产品编号。

    产品型号/产品描述

    DPiTH-i8DV-5 MONITOR,Temperature and RH Input 1/8 DIN Dual Display Vertical, with 5" (137mm) Probe on 10ft (3m) cable
    DPiTH-i8DH-5 MONITOR,Temperature and RH Input 1/8 DIN Dual Display Horizontal, with 5" (137mm) Probe on 10ft (3m) cable
    DPiTH-i8DH-5-C24 MONITOR, Temperature and RH Input 1/8 DIN Dual Display Horizontal, WITH 5" (137mm) Probe on 10ft (3m) cable AND Isolated RS-232 and RS-485/422.
    DPiTH-i16D-5-EI MONITOR,Temperature and RH Input 1/16 DIN Dual Display, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server
    DPiTH-i16D-5-C4EI MONITOR,Temperature and RH Input 1/16 DIN Dual Display, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server + Isolated RS-485/422 hub for up to 31 devices
    DPiTH-i32-5 MONITOR,Temperature and RH Input 1/32 DIN Single Display, WITH 5" (137mm) Probe on 10ft (3m) cable
    CNiTH-i8DH33-5 CONTROLLER,Temperature and RH Input 1/8 DIN Dual Display Horizontal, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable
    CNiTH-i8DH33-5-C24 CONTROLLER, Temperature and RH Input 1/8 DIN Dual Display Horizontal, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable AND Isolated RS-232 and RS-485/422.
    CNiTH-i8DV33-5-EI CONTROLLER,Temperature and RH Input 1/8 DIN Dual Display Vertical, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server
    CNiTH-i8DH33-5-C4EI CONTROLLER,Temperature and RH Input 1/8 DIN Dual Display Horizontal, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server + Isolated RS-485/422 hub for up to 31 devices
    CNiTH-i16D33-5 CONTROLLER,Temperature and RH Input 1/16 DIN Dual Display, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable
    CNiTH-i16D33-5-EI CONTROLLER,Temperature and RH Input 1/16 DIN Dual Display, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server
    CNiTH-i16D33-5-C4EI CONTROLLER,Temperature and RH Input 1/16 DIN Dual Display, 2 Relays: Form "C"SPDT 3 A @ 120 Vac, 3 A @ 240 Vac, WITH 5" (137mm) Probe on 10ft (3m) cable PLUS Ethernet with Embedded Web Server + Isolated RS-485/422 hub for up to 31 devices

    CNITH-I16D22-2
    CNITH-I16D22-5
    CNITH-I16D22-5-C4EIT
    CNITH-I16D22-5-EIT
    CNITH-I16D23-2
    CNITH-I16D23-5-DC
    CNITH-I16D23-5-EIT-DC
    CNITH-I16D33-2
    CNITH-I16D33-2-C 24-FS(10FT)
    CNITH-I3243-2-C24-DC
    CNITH-I3243-2-DC
    CNITH-I3243-5
    CNITH-I3243-5-C24
    CNITH-I3243-5-C24-DC
    CNITH-I3243-5-DC
    CNITH-I3244-2
    CNITH-I3244-5
    CNITH-I3253-2
    CNITH-I3253-2-C24
    CNITH-I3253-2-C24-DC
    CNITH-I3253-2-DC
    CNITH-I3253-5
    CNITH-I3253-5-C24
    CNITH-I3253-5-C24-DC
    CNITH-I16D43-2-EIT
    CNITH-I16D43-2-EIT-DC
    CNITH-I16D43-5
    CNITH-I16D43-5-C24
    CNITH-I16D43-5-C24-DC
    CNITH-I16D43-5-C4EIT
    CNITH-I16D43-5-C4EIT-DC
    CNITH-I16D43-5-DC
    CNITH-I16D43-5-EIT
    CNITH-I16D43-5-EIT-DC
    CNITH-I16D44-2
    CNITH-I16D44-2-C24
    CNITH-I16D44-2-EI-DC
    CNITH-I16D44-5-C24
    CNITH-I16D44-5-C4EIT
    CNITH-I16D44-5-EIT
    CNITH-I16D53-5-C24-DC
    CNITH-I16D53-5-C4EIT
    CNITH-I16D53-5-C4EIT-DC
    CNITH-I16D53-5-DC
    CNITH-I16D53-5-EIT
    CNITH-I16D53-5-EIT-DC
    CNITH-I3222-2
    CNITH-I3222-5
    CNITH-I3222-5-DC
    CNITH-I3233-2
    CNITH-I3233-2-C24
    CNITH-I3233-2-C24-DC
    CNITH-I3233-2-DC
    CNITH-I3233-5
    CNITH-I3233-5-C24
    CNITH-I3233-5-C24-DC
    CNITH-I3233-5-DC
    CNITH-I3243-2
    CNITH-I3243-2-C24
    CNITH-I16D33-5-EIT-DC
    CNITH-I16D34-5-EIT-DC
    CNITH-I16D42-2
    CNITH-I16D43-2
    CNITH-I16D43-2-C24
    CNITH-I16D43-2-C24-DC
    CNITH-I16D43-2-C4EIT
    CNITH-I16D43-2-C4EIT-DC
    CNITH-I16D43-2-DC
    CNITH-I16D52-2-C24-DC
    CNITH-I16D52-2-EI
    CNITH-I16D52-5
    CNITH-I16D52-5-C24
    CNITH-I16D52-5-C4EI
    CNITH-I16D52-5-DC
    CNITH-I16D53-2
    CNITH-I16D53-2-C24
    CNITH-I16D53-2-C24-DC
    CNITH-I16D53-2-C4EIT
    CNITH-I16D53-2-C4EIT-DC
    CNITH-I16D53-2-DC
    CNITH-I16D53-2-EIT
    CNITH-I16D53-2-EIT-DC
    CNITH-I16D53-5
    CNITH-I16D53-5-C24
    CNITH-I16D33-2-C24
    CNITH-I16D33-2-C24-DC
    CNITH-I16D33-2-C24-FS(10FT)
    CNITH-I16D33-2-C4EIT
    CNITH-I16D33-2-C4EIT-DC
    CNITH-I16D33-2-DC
    CNITH-I16D33-2-EIT
    CNITH-I16D33-2-EIT-DC
    CNITH-I16D33-5
    CNITH-I16D33-5-AL
    CNITH-I16D33-5-C24
    CNITH-I16D33-5-C24-DC
    CNITH-I16D33-5-C4EIT
    CNITH-I16D33-5-C4EIT-DC
    CNITH-I16D33-5-DC
    CNITH-I16D33-5-EIT

    DPITH-I32-5-C24-DC


    DPITH-I32-5-C24-DC 相关产品

    DPITH-I32-5-C24-DC 技术文章

在线询盘/留言
  • 免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,本网对此不承担任何保证责任。我们原则 上建议您选择本网高级会员或VIP会员。
    企业信息
    深圳市鑫博恒业科技有限公司
    会员级别:家家通数字营销版
    ------------ 联系方式 ------------
    联系人:李经理(小姐)
    联系电话:0755-82736276
    联系手机:18924605141
    传真号码:0755-83041664
    企业邮箱:235521054@qq.com
    网址:
    邮编:518031
    推荐供应
    0571-87774297