300*4EVA塑料止水带多少钱-工控行业信息网(chinagkong.com)-工控行业门户网站

产品简介

300*4EVA塑料止水带多少钱

产品价格：￥1

上架日期：2017-10-19 14:20:52

产地：衡水

发货地：衡水

供应数量：不限

最少起订：1米

浏览量：151

点击询价 QQ洽谈

资料下载：暂无资料下载

其他下载：暂无相关下载

详细说明

300*4EVA塑料止水带多少钱

可应用在任何地面或地下建筑，形成一道长久而坚固的隔水屏障，特别适用于储水和挡水的结构，例如水库、污水池、水坝、地铁、隧道挡水墙等.

The utility model can be applied to any ground or underground building, bing a long and strong barrier for water storage, especially for the structure of water storage and water retaining, such as reservoirs, sewage pools, dams, subways, tunnel retaining walls, etc.
防水板采用空铺法固定在喷射混凝土的基面上，防水板与后浇混凝土之间无法密贴。而防水板铺设时很容易出现破损部位，一旦破损部位未发现并且进行修补，就会造成渗漏水进入防水板和二衬结构之间．在结构不密实或开裂部位渗出。产生窜水现象，给后期堵漏维修工作带来很大困难．这就是防水板全包防水层的缺陷。为解决这一难题，就需要在防水层表面设置分区注浆系统。
The waterproof board is fixed on the base surface of the Shotcrete by the empty paving b, and the waterproof board and the post pouring concrete can not be densely pasted. The waterproof board laying easily damaged parts, once damaged parts were found and repaired, it will cause water leakage into the waterproof board and two lining structure. In the structure is dense or cracking site exudation. The phenomenon of water channeling brings great difficulties to the later plugging and maintenance work, which is the defect of the waterproof layer of the waterproof board. In order to solve this problem, it is necessary to set the district grouting system on the surface of waterproof layer.

分区系统是通过一定的手段，将防水区域分隔开，这样如果个别区域内一旦出现渗漏，渗漏水不会窜入其它防水区域内，减少后期的注浆堵漏工作量。这样的分区系统就靠背贴止水带来实现。背贴式止水带是防水板后的第一道防水层．对于隧道渗水的预防至关重要。为保证后灌注的混凝土与止水带之间咬合密实．减少出现窜水的现象，需要在背贴式止水带两侧的齿条间设置注浆花管，一旦出现不实现象可以通过注浆花管进行注浆。

300*4EVA塑料止水带多少钱

The partition system is to separate the waterproof area through some means, so if there is leakage in the individual area, the leakage will not be channeling into other waterproof areas, so as to reduce the late grouting plugging work. This partition system enables the backrest to be watertight. The back waterproof belt is the first waterproof layer after the waterproof board, which is very important for the prevention of the tunnel seepage. In order to ensure the concrete and water perfusion zone between the occlusal density. To reduce the water channeling phenomenon, need to set the rack mounted in the sealing grouting back belt on both sides of the flower tube, once the false phenomenon by grouting pipe grouting.
应用范围：
Application range:
EVA背贴式止水带作为防水板的辅材，可广泛应用于地下室、地铁隧道、公路和铁路隧道工程的防水，水坝、人工湖、水池、污水处理场、垃圾掩埋场等工程的防水及防渗。另外， EVA背贴式止水带也可单独作为止水带使用，应用于混凝土现浇时变形缝、施工缝内与混凝土结构成为一体的基础工程中，决缝隙处的渗漏水问题。技术现象我公司可生产不同口型、不同规格尺寸．不同断面的背贴式止水带，不同材料的止水带符合不同的标准。
EVA back stick type waterstop waterproof board as the auxiliary material, can be widely used in the basement, metro tunnel, highway and railway tunnel waterproofing, dams, artificial lakes, ponds, sewage treatment plant, landfill, waterproof and anti-seepage engineering. In addition, EVA back stick type waterstop can be used as sealing strip, applied to cast-in-place concrete debation and construction joint and concrete structure has become one of the basic engineering, no crevice water leakage problem. Technical phenomenon, our company can produce different mouth shape, different sizes, different sections of back type water stop belt, different materials of water stop belt meet the different standards.
EVA塑料止水带的施工方法及注意事项
Construction bs and matters needing attention of EVA plastic water stop belt

EVA塑料止水带它由PVC聚氯乙烯树脂及各种填加剂，经混合、造粒、挤出等工序而制成的止水材料。此产品利用弹性体材料具有的弹性变形特性在建筑构造接缝中起到防漏、防渗作用，并且具有耐腐蚀、耐久性好的特点。

300*4EVA塑料止水带多少钱

EVA plastic water stop belt is made of PVC polyvinyl chloride resin and various filling agent. It is made up of mixing, granulating and extruding process. This product uses elastic debation characteristics of elastomer material to play a role of leak prevention and seepage prevention in building structural joints, and has the characteristics of corrosion resistance and durability.
EVA塑料止水带主要用于混凝土浇注时设置在施工缝及变形缝内与混凝土构成为一体的基础工程。如隧道、涵洞、引水渡槽、拦水坝、贮液构筑物、地下设施等。PVC塑料止水带施工方法与普通的橡胶止水带相同。在浇埋时要使其与混凝土界面贴合平整，接头部分粘接紧固，浇埋过程中要以适当的力充分震捣混凝土，使其与混凝土结合良好，以获得最佳的止水效果。PVC塑料止水带施工注意中要注意一些问题，由于混凝土中有许多尖角的石子和钢筋，操作是要注意避免对止水带造成机械损伤。在定位塑料止水带时，要使其与混凝土界面贴合平整，不能出现止水带翻转、扭曲等现象，否则应及时进行调正在浇筑固定止水带时，应防止止水带发生偏移，影响止水效果。此种塑料止水带接头可利用粘接、热焊接等方法，保证接头牢固。浇注混凝土过程中要注意充分震捣，以达到止水带和混凝土充分结合。
EVA plastic water stop belt is mainly used for concrete pouring, set up in the construction joints and debation joints and concrete as one of the basic engineering. Such as tunnel, culvert, aqueduct, dam, reservoir structures, underground facilities, etc.. The construction b of PVC plastic water stop belt is the same as that of common rubber water stop belt. In the pouring buried to make it smooth and fit the concrete interface, the joint part of the adhesive fastening, pouring process to buried in an appropriate capacity of fully vibrating concrete, the good combination with concrete, in order to obtain the best sealing effect. PVC plastic water stop construction should pay attention to some problems, because there are many sharp stones and steel reinforcement in the concrete, the operation should pay attention to avoid mechanical damage to the water stop belt. In the bing of the plastic waterstop, to make it smooth and fit the concrete interface, can not appear waterstop flip, twist phenomenon, otherwise should be timely adjusted is pouring fixed sealing strip, should prevent the waterstop shift, affecting sealing effect. The joint of the plastic water stop belt can be bonded by using heat welding b to ensure the joint firmly. In the process of pouring concrete, attention should be paid to fully tamping to achieve the full combination of water stop belt and concrete.
EVA塑料止水带施工方法与橡胶止水带相同。在浇埋时要使其与混凝土界面贴合平整，接头部分粘接紧固，浇埋过程中要以适当的力充分震捣混凝土，使其与混凝土结合良好，以获得最佳的止水效果。
The construction b of EVA plastic water stop belt is the same as that of rubber water stop belt. In the pouring buried to make it smooth and fit the concrete interface, the joint part of the adhesive fastening, pouring process to buried in an appropriate capacity of fully vibrating concrete, the good combination with concrete, in order to obtain the best sealing effect.
A.在施工过程中，由于混凝土中有许多尖角的石子和钢筋，操作是要注意避免对塑料止水带造成机械损伤。
A. in the process of construction, because there are many sharp stones and steel bars in the concrete, the operation should pay attention to avoid mechanical damage to the plastic water stop belt.
B.在定位塑料止水带时，要使其与混凝土界面贴合平整，不能出现止水带翻转、扭曲等现象，否则应及时进行调正。

B. in the bing of plastic water stop belt, to make it and concrete interface leveling, can not appear water stop belt, twist and other phenomena, otherwise should be timely adjustment.

300*4EVA塑料止水带多少钱

在线询盘/留言

*您的姓名：

*联系手机：

固定电话：

*联系邮箱：

所在单位：

*需求数量：

*咨询内容：

您要求给厂家提供：

免责声明：以上所展示的信息由企业自行提供，内容的真实性、准确性和合法性由发布企业负责，本网对此不承担任何保证责任。我们原则上建议您选择本网高级会员或VIP会员。

企业信息

河北瑞博橡塑制品有限公司

会员级别：

------------ 联系方式 ------------

联系人：王伟（先生）

联系电话：0318-2110875

联系手机：13166570832

传真号码：0318-2110875

企业邮箱：3407742055@QQ.COM

网址：hsribo.jdzj.com

邮编：53500

企业网站

进入商铺