维护保养 

对机器的维修、维护及保养使用危险的，在进行此工作时必须遵循安全规程。在工作前应保证电源接地线已接好。

维护保养安全规程总则 

在对该机器进行任何工作前应遵循以下规程： 

1.切断所有电源 

2.关闭机器 

3.仔细阅读机器上的所有安全标识 

4.仔细阅读此安全规程 

5.不允许没有经过培训的人员进行此工作 

6.工作服应穿戴整齐 

7.不要在取料滚筒下停留

Maintenance service
The maintenance, maintenance and maintenance of machinery are dangerous. Safety procedures must be followed in carrying out this work.
Ensure that the power grounding line is connected before work.

General provisions of maintenance safety regulations
Prior to any work on the machine, the following procedures shall be followed:
1. Cut off all power supplies
2. Turn off the machine
Read all the safety signs on the machine carefully
Read the safety code carefully
5. No trained personnel are allowed to do this work
Clothes should be neatly dressed
7. Don't stop under the loading drum

With the scale enlargement of dairy breeding, manual Labour have been unable to meet the requirements of modern dairy production, especially in dairy cattle breeding management, huge Labour force not only need a lot of salary expenses, at the same time also brought a larger management is difficult.
1. Labor saving and labor intensity reduction
In scale to zap the silage access in the breeding management is an important part of, because the cow every day silage intake accounted for about half of the food intake, for a one thousand head of pasture, need to consume every day more than 20 tons of silage, if artificial access, it takes 4-6 Labour;
And in the production of silage, in order to effectively protect quality, need to use the tools such as forklifts as far as possible the silage impb on the compb, so help yourself in silage, especially the artificial digging, the intensity of labor is very big.
SAN tai machinery, according to the actual production requirements to zap, designed a new silage access equipment, it is directly placed in the silo, the feeding roller will play to the conveyor belt, silage grass silage directly into again by the conveyor belt will stir car or other vehicle, all the work finished just a worker can easily
2. High operating efficiency and low operating cost
Mobile silage reclaimer power provided by the electricity, all 11 kw power only, can grab silage 10-20 tons per hour, for a one thousand head of pasture, only work 1 to 2 hours a day can be completed silage access, daily operation cost only 10 yuan, less than one over ten of the cost of loading machine tooling or people take.
For silo silage probe 4 meters high, reclaimer silage 1-2 tons, a knife can grab every 2-3 minutes when the knife is for 7 cubic or 12 cubic mixers, each production only 1-2 knife can be completed silage access, save work time.

随着奶牛场饲养规模的扩大，手工劳动已无法满足现代奶业生产的要求，特别是在奶牛的饲养管理上，庞大的劳动力队伍不仅需要大量的工资费用，同时也带来了较大的管理难度。

1， 节约劳动力，降低劳动强度

在规模牛场中，青贮取用在饲养管理中是一个很重要的部分，因为奶牛每天青贮进食量约占进食量的一半左右，对于一个千头牧场，每天需要消耗20多吨的青贮，如果人工取用，就需要花费4-6个劳动力；并且在制作青贮时，为了有效保护品质，需要采用铲车等工具尽可能对青贮装紧压实，这样在取用青贮时，特别是人工刨取，劳动强度非常大。

圣泰机械根据牛场的实际生产需求，设计出一款全新的青贮取用设备，它直接放置在青贮窖中，由取料滚筒将青贮草打到输送带上，再由输送带将青贮料直接装入搅拌车或其他一些运载工具，全部工作只需一个工人就可轻松完成

2.工作效率高 运作成本低

移动式青贮取料机的动力由电能提供，全部功率只有11kw，每小时可抓取青贮10-20吨，对于一个千头牧场，每天只需工作1-2小时就可完成青贮的取用，每天的运作费用也只有十几元钱，不到装载机械或人工装取费用的十分之一。

对于青贮探头4米高的青贮窖，取料机一刀可抓取青贮1-2吨，每刀需时2-3分钟，对于7立方或12立方的搅拌车，每次生产只需1-2刀就可完成青贮的取用，省时省工。