电池点焊机
Battery Spot Welder
主要特性：
1. 电池点焊机主要分两种类型：AMP-10K交流电池点焊机和DPM-10K直流电池点焊机；
2. 采用单面双点过流焊接的原理，不伤及被焊工件的内部结构；
3. 焊接痕迹美观，火花小，无发黑（电池不会因点焊后出现凹陷、流液的现象），完全克服锂电池点焊后出现低压和出水现象，是生产组装电池的理想设备；
4. 焊针的压力和两针的距离可独立调节，且调节方便，确保焊接压力稳定可靠；
5. 外形美观，轻巧；
6. DPM-10K优点：LCD显示设置参数，更准确，直观，方便，直流输出，焊接效果更美观。

主要应用：
电池组制造，特种电池组装，废旧电池回收制作电池组，蓄电池标牌焊接，以及焊接各种碱性电池，镍镉电池，镍氢电池，锂离
子电池等。

Main Features：
 There are two Model:AMP-10K AC Battery Spot Welder and DPM-10K DC Battery Spot Welder;
 Adopt the principle of Single sided, two points, and over-current welding,doesn’t damage the internal structure of welded workpieces;
 Beautiful welding traces, small spark, no black (The battery won’t sag or fluid flow after spot-welding). It compleby overcomes the problems that the lithium battery has low pressure and the fluid flows out of the battery. This spot welder is the most ideal assembly equipment for battery production;
 The pressure of welding pins and the distance between the two pins can be regulated independently. And the regulation is quite convenient to make sure that the welding pressure is stable and reliable;
 Beautiful, light and handy in design;
 DPM-10K advantage:controller LCD panel displays welding beters making process control more accurate and more convenient,Input DC,welding area more beautiful.

Main Applications
Battery Pack Production, Custom Battery Packs, Battery Pack Re-building, Battery Cell Tabbing Weld Alkaline, Ni-cd, Ni-MH, Li-Ion Cell Types, etc.

主要技术参数Main Technical Parameters：
规格 SPECICATIONS APM-10K DPM-10K
输出功率 Output Power 10KVA 10KVA (LCD Display)
驱动形式 Drive Style 脚踏/气动（Pedal/Pneumatic) 脚踏/气动（Pedal/Pneumatic)
输出信号 Output Signal 光电开关（Opto-electric Switch) 光电开关（Opto-electric Switch)
焊接电流 Welding Current AC 0-99%（可调）(Adjust) DC 0-99%（可调）(Adjust)
电极直径 Electrode Diameter Φ3 Φ3
电源输入 Input Power AC 110-220V±10%/50Hz-60Hz AC 220V±10%/50Hz-60Hz
焊接电源 Welding Power 交流脉冲（AC Pulse） 逆变直流（Inverter DC）
电极行程 Electrode Stroke 15mm 15mm