INCO-WELD®686CPT®焊条AWS A5.11,ENiCrMo-14随货材质书
INCO-WELD®686CPT®焊条
INCO-WELD®686CPT®焊条价格规格化学成分提供材质书
INCO-WELD 686CPT焊条可以进行全位置焊接，主要用于手工电弧焊焊接双相不锈钢、超级双相不锈钢、超级奥氏体不锈钢、INCONEL C-276\626\625\686合金以及镍合金，例如UNS N06059\N06022镍合金，也可以用来在部分钢种表面形成一层耐蚀防护堆焊层。这种焊丝的高合金组分（Cr+Mo+W）提高了其抵抗点蚀、裂隙腐蚀和常规腐蚀的能力。INCO-WELD 686CPT 焊丝良好的耐蚀性能使其在腐蚀性工作环境中体现出了巨大的应用价值，它可以耐受很多种腐蚀介质的侵蚀，例如盐酸、硫酸、氧化氯溶液、浓热的含氯酸性溶液譬如二氧化硫在NaCl盐水中的饱和溶液；同时它还对在高氧浓度环境敏化后的晶间侵蚀具有很好的抵抗能力。
|
AWS A5.11,ENiCrMo-14 UNS W86026 ASME Ⅱ,SFA-5.11,ENiCrMo-14 ISO SNi6686 规格 ASME IX,F-No.44 Europe ENiCr21Mo16W4
|
|
Ni ------------ 剩余 Si---------- 0.25 max 化学 C --------- 0.02 max. Ti---------- 0.25 max 成份 Mn --------- 1.0 max Cr--------- 19.0-23.0 Fe --------- 5.0 max Mo----------15.0-17.0 P --------- 0.02 max W ----------- 3.0-4.4 Cu -------- 0.50 max 其它 ------- 0.50 max
|
|
最低 拉伸强度，psi 110,000 机械 MPa 758 性能 延伸率，(4d）% 35 硬度，HRB 95
|
|
直径 |
mm |
2.4 |
3.2 |
4.0 |
4.8 |
|
|
in |
3/32 |
1/8 |
5/32 |
3/16 |
|
长度 |
mm |
229 |
356 |
356 |
356 |
|
|
in |
9 |
14 |
14 |
14 |
|
电流 |
A |
40-65 |
65-95 |
95-125 |
125-165 |
产品
供货
状态
INCO - WELD ® 686 CPT ® electrode
INCO - 686 CPT WELD electrode for all b welding, it is mainly used for manual arc welding welding duplex stainless steel, super duplex stainless steel, super austenitic stainless steel, INCONEL C - 276\626\625\686 alloy and nickel alloy, such as UNS N06059 \ N06022 nickel alloy, also can be used in some b a corrosion protective layer on the surface of steel hardfacing layer. The high alloy comb of this wire (Cr +Mo+ W) enhances its ability to resist pitting, cracking and conventional corrosion. INCO - 686 CPT WELD wire good corrosion resistant perbance to make it work in corrosive environment reflects the great application value, it can tolerate a lot of kinds of corrosive medium, such as hydrochloric acid, sulfuric acid, chlorine oxidation solution, strong heat contain chloric acid solution such as sulfur dioxide in saturated solution of NaCl salt water; It also has good resistance to intergranular erosion after sensitization of high oxygen concentration.
AWS A5.11 ENiCrMo - 14 UNS W86026
ASME Ⅱ, SFA - 5.11, ENiCrMo - 14 ISO SNi6686
Specification ASME IX,F-No.44 Europe ENiCr21Mo16W4
Ni -- -- -- -- -- -- -- -- -- -- -- -- remaining Si -- -- -- -- -- -- -- -- -- -- 0.25 Max
Chemical C -- -- -- -- -- -- -- -- - 0.02 Max. Ti -- -- -- -- -- -- -- -- -- -- 0.25 Max
Comb of Mn -- -- -- -- -- -- -- -- -- 1.0 Max Cr -- -- -- -- -- -- -- -- - 19.0-23.0
Fe -- -- -- -- -- -- -- -- -- 5.0 Max Mo -- -- -- -- -- -- -- -- -- - 15.0-17.0
P -- -- -- -- -- -- -- -- -- 0.02 Max W -- -- -- -- -- -- -- -- -- -- - 3.0-4.4
Cu -- -- -- -- -- -- -- -- 0.50 Max other -- -- -- -- -- -- -- 0.50 Max
Minimum tensile strength, psi 110,000
Mechanical 758 MPa
Perbance elongation, (4d) % 35
Hardness, HRB 95
Diameter mm 2.4 3.2 4.0 4.8
In 3/32, 1/8, 5/32, 3/16
Length mm 229 356 356 356
14 14 14 14 14 14
Current A 40-65, 65-95, 95, 95, 125-165
products
supply
state
