MONEL® 67焊丝AWS A5.7，ERCuNi随货质保书UNS C71581
MONEL 67焊丝主要用于氧乙炔焊、熔化极气体保护焊、钨极惰性气体保护焊以及埋弧焊焊接MONEL450合金以及其它铜镍合金。如果事先用NICKLE 61镍焊丝做打底衬层，那么MONEL 67焊丝也可用于钢的堆焊。如果要将这种焊丝用于埋弧焊接，可先用MONEL 60焊丝做打底衬层。用MONEL 67焊丝埋弧焊时，须选用INCOFLUX 8埋弧焊剂。
铜镍焊接材料具有突出的低抗海水侵蚀的性能，所以被广泛应用在海事作业和脱盐淡化的场合。
MONEL 67焊丝可以用于异种材料的焊接，如MONEL系列合金、NICKEL200合金与铜镍合金的焊接。
|
AWS A5.7，ERCuNi DIN 1733 S-CuNi30Fe MIL-E-21562 Types MIL-RN67,MIL-EN67 Werkstoff Nr.2.0837 ASME Ⅱ,SFA-5.7,ERCuNi UNS C71581 规格 ASME Ⅸ,F-No.34 ISO S Cu 7158 BS 2901 (C18) Europe S Cu 7158(CuNi30)
|
|
Nia--------- 29.0-32.0 Si -------------0.25 max 化学 C ---------- 0.04 max Ti ----------- 0.20-0.50 成份 Mn ---------- 1.0 max P ------------- 0.03 max Fe -------- 0.40-0.70 其它----------- 0.50 max S --------- 0.01 max Cu ------------ 剩余 |
|
a 添加Co 最低 拉伸强度，psi 50,000 机械 MPa 345 性能 延伸率，(4d）% 30 |
焊丝可以以线卷或直线状供货，并有几种不同直径可供选择，如下表所示
产品
|
mm |
0.8 |
0.9 |
1.0 |
1.14 |
1.2 |
1.6 |
2.4 |
3.2 |
|
in |
0.030 |
0.035 |
0.040 |
0.045 |
0.047 |
0.062 |
0.093 |
0.125 |
供货
状态
直线长度--915 mm(36”)或1000 mm(39”)
MONEL 67 electrode is mainly used for welding of oxyacetylene welding, melting polar gas shielded welding, tungsten inert gas shielded welding and submerged arc welding MONEL450 alloy and other copper nickel alloys. If you use NICKLE 61 nickel wire to make a base lining, then MONEL 67 solder can also be used in steel surfacing. If this wire is to be used for the submerged arc welding, a base lining is made with a MONEL 60 welding wire. INCOFLUX 8 submerged arc welding is used when welding wire with MONEL 67.
Copper-nickel welding materials have excellent properties of low - resistant seawater erosion, so they are widely used in maritime operations and desalination.
MONEL 67 welding wire can be used for welding of foreign materials such as MONEL series alloy, NICKEL200 alloy and copper nickel alloy welding.
AWS A5.7, ERCuNi DIN 1733 s-cuni30fe
Types MIL- e-21562 Types MIL-RN67,MIL-EN67 Werkstoff nr.2.0837
ASME Ⅱ, SFA - 5.7, ERCuNi UNS C71581
ASME specifications Ⅸ, F - No. 34 ISO S Cu 7158
BS 2901 (C18) Europe S Cu 7158(CuNi30)
Nia -- -- -- -- -- -- -- -- - 29.0-32.0 - Si -- -- -- -- -- -- -- -- -- -- -- -- -- 0.25 Max
Chemical C -- -- -- -- -- -- -- -- -- -- 0.04 Max Ti -- -- -- -- -- -- -- -- -- -- - 0.20-0.50
Ingredients Mn -- -- -- -- -- -- -- -- -- -- 1.0 Max P -- -- -- -- -- -- -- -- -- -- -- -- -- 0.03 Max
Fe -- -- -- -- -- -- -- - 0.40-0.70 other -- -- -- -- -- -- -- -- -- -- - 0.50 Max
S -- -- -- -- -- -- -- -- -- 0.01 Max
Cu -- -- -- -- -- -- -- -- -- -- -- -- the remaining
Add a Co
Minimum tensile strength, psi 50,000
Mechanical 345 MPa
Perbance extension rate (4d) % 30
The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the table below
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
