INCO-WELDR 725NDUR焊丝
INCO-WELDR 725NDUR焊丝AWS A 5.14 ERNiCrMo-15保材质
INCO-WELD 725NDUR焊丝其实就是具有时效强化能力的INCONEL 625填充金属。焊后热处理之后，其具有和INCONEL 625填充金属一样优秀的耐蚀能力，并且具有更高的强度和硬度。油田应用环境要求低合金钢（例如AISI 4130）的应力释放温度范围和INCO-WELD 725NDUR填充金属的时效强化温度范围是一致的。如果焊后退火之后接着进行时效处理，有可能达到更高的强度。
这种焊丝可以用于熔化极气体保护焊和钨极气体保护焊，可以获得又强又硬的焊缝。
|
规格 AWS A 5.14, ERNiCrMo-15 ASMEⅡ, SFA-5.14, ERNiCrMo-15 UNS N07725 ISO SNi7725 Europe NiCr21Mo8Nb3Ti
|
|
化学成分 Ni+Co………55.0-59.0 Ti……………1.0-1.7 范围 C…………..0.03 最多 Cr………...19.0-22.5 Mn…………0.35最多 Nb+Ta…....2.75-4.00 Fe……………….其余 Mo…...………7.0-9.5 S……….…..0.01最多 P………….0.015最多 Si……….…..0.20最多 其它………..0.50最多 Al……….....0.30 最多
|
|
典型机械 拉伸强度，psi 174,000 性能 Mpa 1200 延伸率，(4d) % 无 （时效强化条件：1900oF／1h和1350oF／8h，FC至1150oF／8h，AC）
|
焊丝以线卷状或直线状供货，有多种直径以供选择，具体参考下表：
|
产品供货形态 |
||||||||
|
mm in |
0.8 0.030 |
0.9 0.035 |
1.0 0.040 |
1.14 0.045 |
1.2 0.047 |
1.6 0.062 |
2.4 0.093 |
3.2 0.125 |
直焊丝的长度为：915mm(36”)或1000mm(39”)
The inc-weld 725NDUR welding wire is actually INCONEL 625 filler bl with aging enhancement capability. After welding heat treatment, it has the same excellent corrosion resistance as INCONEL 625 filler bl, and has higher strength and hardness. The temperature range of the stress release temperature of low alloy steel (such as AISI 4130) and the aging of inc-weld 725NDUR filler bl are consistent in the application environment of the oilfield. If the post-weld annealing is followed by an aging treatment, it is possible to reach a higher intensity.
This kind of wire can be used for the welding of gas welding electrode and tungsten gas protection welding.
Specifications for AWS A 5.14, ernicrmo-15
ASME Ⅱ, SFA - 5.14, ERNiCrMo - 15
UNS N07725
ISO SNi7725
Europe NiCr21Mo8Nb3Ti
Chemical components Ni+ Co... 55.0 59.0 Ti............... 1.0 to 1.7
Range C............ ... 0.03 the most Cr......... ... 19.0 to 22.5
Mn............ 0.35 most Nb + Ta... ... 2.75 to 4.00
Fe........................ . The rest of the Mo... ... ......... 7.0 to 9.5
S......... .... ... 0.01 the most P............ 0.015 the most
Si......... .... ... Most other... ... 0.50 the most
Al......... ... 0.30 the most
Typical mechanical tensile strength, psi 174,000
Properties of 1200 Mpa
Elongation, (4d) % is not
(adverse reinforcement conditions: 1900oF / 1h and 1350oF / 8h, FC to 1150oF / 8h, AC)
The wire is supplied in a reel or straight line, with a variety of diameters to choose from.
Product b
mm
In 0.8
0.030 0.9
0.035 1.0
0.040 1.14
0.045 1.2
0.047 1.6
0.062 2.4
0.093 3.2
0.125
The length of straight wire is: 915mm(36 ") or 1000mm(39 ").
