INCONEL® 52 焊丝
INCONEL 52 焊丝主要用于钨极惰性气体保护焊和熔化极气体保护电弧焊焊接INCONEL 690合金。这种镍-铬组分的焊接材料主要用来满足不断变化的核工业的要求，含铬量较高使其在核辐射、纯水环境中具有更好的抗应力腐蚀开裂的能力。这种焊丝还可以用来在大多数低合金钢和不锈钢表面形成耐蚀防护层，也可用于要求耐受氧化性酸腐蚀的场合。INCONEL 52 焊丝可以用来焊接异种材料，例如INCONEL系列合金、INCOLOY系列合金、碳钢、低合金钢和不锈钢相互之间的焊接。
|
AMSE Boiler&Pressure Vessel Code Case 2142 规格 ASME Ⅸ,F-No.43 UNS N06052 ASME SFA 5.14, ERNiCrFe-7 ISO SNi 6052 AWS A5.14 ERNiCrFe-7 Europe NiCr30Fe9
|
|
Nia--------------剩余 Cr ---------- 28.0-31.5 化学 C ---------- 0.04 max Ti-------------- 1.0 max 成份 Mn ---------- 1.0 max Al -------------1.10 max Fe --------- 7.0-11.0 P ------------ 0.020 max S---------- 0.015 max Nbb--------------0.10 max Si --------- 0.50 max Al+Ti ---------- 1.5 max Mo --------- 0.50 max 其它 ----------- 0.50 max Cu --------- 0.30 max |
|
a 添加Co. b 添加Ta.
最低 拉伸强度，psi 80,000 机械 MPa 552 性能 延伸率，(4d）% 30
|
焊丝可以以线卷或直线状供货，并有几种不同直径可供选择，如下表所示
产品
|
mm |
0.8 |
0.9 |
1.0 |
1.14 |
1.2 |
1.6 |
2.4 |
3.2 |
|
in |
0.030 |
0.035 |
0.040 |
0.045 |
0.047 |
0.062 |
0.093 |
0.125 |
供货
状态
直线长度--915 mm(36”)或1000 mm(39”)
注：本材料中所介绍的都是本公司的典型产品及其性能，并不是产品的技术说明书。INCONEL,MONEL,INCOLOY,INCO-WELD,INCOFLUX,INCO-CORED,NI-ROD,686CPT以及725NDUR
INCONEL 52 welding wire is mainly used for welding and welding of INCONEL 690 alloy for tungsten inert gas shielded welding and melting polar gas arc welding. This kind of ni - cr components welding material is mainly used to meet the requirements of changing the nub industry, high chromium content in the radiation, water environment has better ability to resist stress corrosion cracking. This wire can also be used to b an anticorrosive layer on most low-alloy steel and stainless steel surfaces, and can also be used for situations where resistance to oxidative acid corrosion is required. INCONEL 52 welding wire can be used to weld foreign materials such as INCONEL series alloy, INCOLOY series alloy, carbon steel, low alloy steel and stainless steel.
AMSE Boiler&Pressure Vessel Code Case 2142
ASME specifications Ⅸ, F - No. 43 UNS N06052
ASME SFA 5.14, ernicrfe-7 ISO SNi 6052
AWS A5.14 ernicrfe-7 Europe NiCr30Fe9
Nia -- -- -- -- -- -- -- -- -- -- -- -- -- -- residual Cr -- -- -- -- -- -- -- -- -- - 28.0-31.5
Chemical C -- -- -- -- -- -- -- -- -- -- 0.04 Max Ti -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1.0 Max
Ingredients Mn -- -- -- -- -- -- -- -- -- -- 1.0 Max Al -- -- -- -- -- -- -- -- -- -- -- -- -- 1.10 Max
Fe -- -- -- -- -- -- -- -- - 7.0-11.0 P -- -- -- -- -- -- -- -- -- -- -- -- 0.020 Max
S -- -- -- -- -- -- -- -- -- -- 0.015 Max Nbb -- -- -- -- -- -- -- -- -- -- -- -- -- -- 0.10 Max
Si -- -- -- -- -- -- -- -- -- 0.50 Max Al + Ti -- -- -- -- -- -- -- -- -- -- 1.5 Max
Mo -- -- -- -- -- -- -- -- -- 0.50 Max other -- -- -- -- -- -- -- -- -- -- - 0.50 Max
Cu -- -- -- -- -- -- -- -- -- 0.30 Max
Add a Co.
B) add a Ta.
Minimum tensile strength, psi 80,000
Mechanical 552 MPa
Perbance extension rate (4d) % 30
The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the table below
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
Note: all the materials in this material are typical of our products and their perbance, not the technical specifications of the products. INCONEL, MONEL, INCOLOY, INCO - WELD, INCOFLUX, INCO - CORED, NI - ROD, 686 CPT and 725 ndur INCONEL® 52 焊丝AWS A5.14 ERNiCrFe-7随货材质书
