INCONEL 601® 焊丝
INCONEL 601 焊丝是用钨极气体保护焊（GTAW）焊接INCONEL 601合金的首选焊丝。应用INCONEL 601 焊丝的GTAW焊接方法是在超过1150℃的高温环境下或在温度较低但却暴露在硫化氢或二氧化硫环境下焊接INCONEL 601合金的唯一推荐方法。同时，这种焊丝形成的焊缝金属具有与母材相等的抗腐蚀与抗氧化性能。
|
AWS A5.14,ERNiCrFe-11 Werkstoff Nr.2.4626 ASME Ⅱ,SFA-5.14,ERNiCrFe-11 UNS N06601 规格 ASME Ⅸ,F-No.43 ISO SNi6601 DIN1736 SG-NiCr23Al Europe NiCr23Fe15Al
|
|
Ni----------58.0-63.0 Mn -------- 1.0max 化学 Cr ---------21.0-25.0 S ----------0.015 max 成份 Fe ---------剩余 Si----------0.50 max Al -------- 1.0-1.7 Cu----------1.0 max C -------- 0.10 max 其它 ------ 0.50 max
|
|
a 添加Co 典型 拉伸强度，psi 94,000 机械 MPa 648 性能 延伸率，(4d）% 42
|
焊丝可以以线卷或直线状供货，并有几种不同直径以供选择，如下表所示：
产品
|
mm |
0.8 |
0.9 |
1.0 |
1.14 |
1.2 |
1.6 |
2.4 |
3.2 |
|
in |
0.030 |
0.035 |
0.040 |
0.045 |
0.047 |
0.062 |
0.093 |
0.125 |
供货
状态
直线长度--915 mm(36”)或1000 mm(39”)
INCONEL 601 welding wire is the preferred electrode for welding INCONEL 601 alloy with tungsten gas welding (GTAW). INCONEL 601 wire GTAW welding b is in more than 1150 ℃ high temperature conditions or in low temperature but exposed to hydrogen sulfide or sulfur dioxide welding INCONEL 601 alloy the only recommended way. At the same time, the weld bl bed by the wire has the same anti-corrosion and antioxidant properties as the mother material.
AWS A5.14 ERNiCrFe - 11 Werkstoff Nr. 2.4626
ASME Ⅱ, SFA - 5.14, UNS N06601 ERNiCrFe - 11
ASME specifications Ⅸ, F - No. 43 ISO SNi6601
DIN1736 SG - NiCr23Al Europe NiCr23Fe15Al
Ni -- -- -- -- -- -- -- -- -- - 58.0-63.0 Mn -- -- -- -- -- -- -- -- 1.0 Max
Chemical Cr -- -- -- -- -- -- -- -- -- 21.0 25.0 S -- -- -- -- -- -- -- -- -- -- 0.015 Max
Ingredients Fe -- -- -- -- -- -- -- -- -- remaining Si -- -- -- -- -- -- -- -- -- -- 0.50 Max
(1) -- -1.0-1.7 Cu------ -1.0max
C ------ -0.10 Max -- -0.50 Max
Add a Co
Typical tensile strength, psi 94,000
Mechanical 648 MPa
Perbance elongation, (4d) % 42
The wire can be supplied in a reel or straight line, with several different diameters for selection, as shown in the following table:
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
