6ES7131-6BF00-0CA0西门子输入端模块-工控行业信息网(chinagkong.com)-工控行业门户网站

数字量输入	订货号	CC 代码	基座单元类型	VPE
DI 16 x 24 V DC ST	6ES7131-6BH00-0BA0	CC00	A0	1
DI 16 x 24 V DC ST	6ES7131-6BH00-2BA0	CC00	A0	10
DI 8 x 24 V DC BA	6ES7131-6BF00-0AA0	CC01	A0	1
DI 8 x 24 V DC BA	6ES7131-6BF00-2AA0	CC01	A0	10
DI 8 x 24 V DC SRC BA	6ES7131-6BF60-0AA0	CC02	A0	1
DI 8 x 24 V DC ST	6ES7131-6BF00-0BA0	CC01	A0	1
DI 8 x 24 V DC ST	6ES7131-6BF00-2BA0	CC01	A0	10
DI 8 x 24 V DC HF	6ES7131-6BF00-0CA0	CC01	A0	1
DI 8 x NAMUR HF	6ES7131-6TF00-0CA0	CC01	A0	1
DI 8 x 24 V DC HS 三种操作方式：高速等时同步数字量输出 4 脉冲计数器，32 位，10 kHz 过采样	6ES7131-6BF00-0DA0	CC01	A0	1
DI 4 x 120...230 V AC ST	6ES7131-6FD00-0BB1	CC41	B1	1

基座单元	订货号	过程端子的 CC 代码	AUX 端子的 CC 代码	VPE
A0 型 BU 新负载组（灯） 16 个过程端子带 10 个 AUX 端子	6ES7193-6BP20-0DA0	CC01 ~ CC05	CC71 ~ CC73	1
A0 型 BU 新负载组（灯） 16 个过程端子带 10 个 AUX 端子	6ES7193-6BP20-2DA0	CC01 ~ CC05	CC71 ~ CC73	10
A0 型 BU 新负载组（灯） 16 个过程端子不带 AUX 端子	6ES7193-6BP00-0DA0	CC01 ~ CC05	--	1
A0 型 BU 新负载组（灯） 16 个过程端子不带 AUX 端子	6ES7193-6BP00-2DA0	CC01 ~ CC05	--	10
A0 型 BU 负载组的转发（深色） 16 个过程端子带 10 个 AUX 端子	6ES7193-6BP20-0BA0	CC01 ~ CC05	CC71 ~ CC73	1
A0 型 BU 负载组的转发（深色） 16 个过程端子带 10 个 AUX 端子	6ES7193-6BP20-2BA0	CC01 ~ CC05	CC71 ~ CC73	10
A0 型 BU 负载组的转发（深色） 16 个过程端子不带 AUX 端子	6ES7193-6BP00-0BA0	CC01 ~ CC05	--	1
A0 型 BU 负载组的转发（深色） 16 个过程端子不带 AUX 端子	6ES7193-6BP00-2BA0	CC01 ~ CC05	--	10
B1 型 BU 负载组的转发（深色） 12 个过程端子 2 x 2 (1L, 2L, 1N, 2N) 直接馈入模块不带 AUX 端子	6ES7193-6BP20-0BB1	CC41	--	1

Article number	6ES7131-6BF01-0AA0	6ES7131-6BF61-0AA0	6ES7131-6BF01-0BA0	6ES7131-6BH01-0BA0
	ET 200SP, DI 8x 24V DC Basic, PU 1	ET 200SP, DI 8x 24V DC SRC BA	ET 200SP, DI 8x 24V DC ST, PU 1	ET 200SP, DI 16x 24V DC ST, PU 1
General inbation
Product type designation	DI 8x24 VDC BA	DI 8x24 VDC SRC BA	DI 8x24 VDC ST	DI 16x24 VDC ST
Firmware version	V0.0	V0.0	V0.0	V0.0
● FW update possible	No	No	No	No
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type A0
Color code for module-specific color identification plate	CC01	CC02	CC01	CC00
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V14	V14	V14	V14
● STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 or higher	V5.5 SP3
● PCS 7 configurable/integrated as of version			V8.1 SP1	V8.1 SP1
● PROFIBUS as of GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher	One GSD file each, Revision 3 and 5 and higher	One GSD file each, Revision 3 and 5 and higher	One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
● DI	Yes	Yes	Yes	Yes
● Counter	No	No	No	No
● Oversampling	No	No	No	No
● MSI	No	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes	Yes
Input current
Current consumption, max.	70 mA; All channels are supplied from the encoder supply		50 mA; All channels are supplied from the encoder supply	90 mA
Encoder supply
Number of outputs	8		8
Output voltage encoder supply, min.	19.2 V		19.2 V
Short-circuit protection	Yes; per module	No	Yes; per module
24 V encoder supply
● 24 V	Yes		Yes	No
● Short-circuit protection	Yes		Yes
● Output current, max.			700 mA; Total current of all encoders
Power loss
Power loss, typ.	1.6 W; 24 V, 8 bs supplied via encoder supply	1.5 W	1 W; 24 V, 8 bs supplied via encoder supply	1.7 W
Address area
Address space per module
● Inputs	1 byte	1 byte	1 byte; + 1 byte for QI inbation	2 byte; + 2 bytes for QI inbation
Hardware configuration
Automatic encoding	Yes	Yes	Yes	Yes
● Mechanical coding element	Yes		Yes	Yes
Submodules
● Number of configurable submodules, max.			4	4
Selection of BaseUnit for connection variants
● 1-wire connection	BU type A0	BU type A0	BU type A0	BU type A0
● 2-wire connection	BU type A0	BU type A0	BU type A0	BU type A0 + Potential isolation module
● 3-wire connection	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 + Potential isolation module
● 4-wire connection	BU type A0 + Potential isolation module	BU type A0 + Potential isolation module	BU type A0 + Potential isolation module	BU type A0 + Potential isolation module
Digital bs
Number of digital bs	8	8	8	16
Digital bs, beterizable	Yes	Yes	Yes	Yes
Source/sink b	P-reading	m-reading	P-reading	P-reading
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Input characteristic curve in accordance with IEC 61131, type 2	Yes
Input characteristic curve in accordance with IEC 61131, type 3			Yes	Yes
Input voltage
● Type of b voltage	DC	DC	DC	DC
● Rated value (DC)	24 V	24 V	24 V	24 V
● for signal "0"	-30 to +5V	30 V to -5 V (reference potential is L+)	-30 to +5V	-30 to +5V
● for signal "1"	+11 to +30V	-11 V to -30 V (reference potential is L+)	+11 to +30V	+11 to +30V
Input current
● for signal "1", typ.	6.8 mA	6 mA	2.5 mA	2.5 mA
Input delay (for rated value of b voltage)
for standard bs
— beterizable	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
— at "0" to "1", min.	0.05 ms	0.05 ms	0.05 ms	0.05 ms
— at "0" to "1", max.	20 ms	20 ms	20 ms	20 ms
— at "1" to "0", min.	0.05 ms	0.05 ms	0.05 ms	0.05 ms
— at "1" to "0", max.	20 ms	20 ms	20 ms	20 ms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	200 m	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	2 mA	1.5 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No	No
Interrupts/diagnostics/status inbation
Diagnostics function	Yes	Yes	Yes	Yes
Alarms
● Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
● Diagnostic inbation readable	Yes	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes	Yes	Yes
— beterizable	Yes	Yes	Yes	Yes
● Monitoring of encoder power supply	No	No	Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm	No
● Wire-break	No	No	Yes; Module-wise	Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm
● Short-circuit	No	No	Yes; Module-wise	No
● Group error				Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
● Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
● for channel diagnostics	No	No	No	No
● for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes
● between the channels and the power supply of the electronics	No	No	No	No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C		0 °C	0 °C
● horizontal installation, max.	60 °C		60 °C	60 °C
● vertical installation, min.	0 °C		0 °C	0 °C
● vertical installation, max.	50 °C		50 °C	50 °C
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude	On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m	On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m	On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m	On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m
Dimensions
Width	15 mm	15 mm	15 mm	15 mm
Height	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	28 g	28 g	28 g

Article number	6ES7131-6BF00-0CA0	6ES7131-6BF00-0DA0	6ES7131-6TF00-0CA0	6ES7131-6FD01-0BB1
	ET 200SP, DI 8X24VDC HF	ET 200SP, DI 8X24VDC HIGH SPEED	ET 200SP, DI 8XNAMUR HF	ET 200SP, DI 4x 120..230VvAC ST
General inbation
Product type designation	DI 8x24 V DC HF	DI 8x24 V DC HS	DI 8xNAMUR HF	DI 4x120 … 230 V AC ST
Firmware version	V2.0	V1.0.2	V1.0	V0.0
● FW update possible	Yes	Yes	Yes	No
usable BaseUnits	BU type A0	BU type A0	BU type A0	BU type B1
Color code for module-specific color identification plate	CC01	CC01	CC01	CC41
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V13 SP1 / -	V13 SP1	V13 / V13	V14
● STEP 7 configurable/integrated as of version	V5.5 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3
● PCS 7 configurable/integrated as of version	V8.1 SP1
● PROFIBUS as of GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher	GSD Revision 5	GSD Revision 5	One GSD file each, Revision 3 and 5 and higher
● PROFINET as of GSD version/GSD revision	GSDML V2.3	GSDML V2.3	GSDML V2.3	GSDML V2.3
Operating mode
● DI	Yes	Yes	Yes	Yes
● Counter	No	Yes	No	No
● Oversampling	No	Yes	No	No
● MSI	Yes	No	No	No
Supply voltage
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Rated value (AC)				230 V
Reverse polarity protection	Yes	Yes	Yes	No
Input current
Current consumption (rated value)				10 mA
Current consumption, max.		70 mA; without sensor supply
Encoder supply
Number of outputs	8		8	4
Output voltage encoder supply, min.	19.2 V
Short-circuit protection	Yes		Yes	No; when using BU type B1, a fuse with 10 A tripping current must be provided
Output current
● up to 60 °C, max.				10 A
24 V encoder supply
● 24 V	Yes	Yes	No
● Short-circuit protection	Yes; per channel, electronic	Yes; per module, electronic	No
● Output current, max.		700 mA
Power loss
Power loss, typ.	1.5 W; 24 V, 8 bs supplied via encoder supply	1.5 W	1.5 W	1 W; Active power, load voltage 230 V, all bs connected with 230 V, 50 Hz
Address area
Address space per module
● Address space per module, max.		45 byte	1 byte; + 1 byte for QI inbation
● Inputs	1 byte; + 1 byte for QI inbation	32 byte; 1 byte + 1 byte for QI inbation in DI mode; 32 bytes in Oversampling mode; 25 bytes in Counter mode		1 byte; + 1 byte for QI inbation
● Outputs		20 byte; In count mode
Hardware configuration
Automatic encoding	Yes			Yes
● Mechanical coding element	Yes			Yes
Submodules
● Number of configurable submodules, max.	4
Selection of BaseUnit for connection variants
● 1-wire connection	BU type A0	BU type A0	BU type A0	BU type B1
● 2-wire connection	BU type A0	BU type A0	BU type A0	BU type B1
● 3-wire connection	BU type A0 with AUX terminals	BU type A0 with AUX terminals	BU type A0 + external terminals	BU type B1
● 4-wire connection	BU type A0 + Potential isolation module	BU type A0 + external terminals	BU type A0 + external terminals	BU type B1 + potential distributor module
Digital bs
Number of digital bs	8	8	8; NAMUR	4
Digital bs, beterizable	Yes		Yes
Source/sink b	P-reading	P-reading
Input characteristic curve in accordance with IEC 61131, type 3	Yes			Yes
Pulse extension	Yes; Pulse duration from 4 µs	Yes	Yes; 0.5 s, 1 s, 2 s
● Length	2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s	2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Edge buation	Yes; rising edge, falling edge, edge change		Yes; rising edge, falling edge, edge change
Signal change flutter			Yes; 2 to 32 signal changes
Flutter observation b			Yes; 0.5 s, 1 s to 100 s in 1-s steps
Digital b functions, beterizable
● Gate start/stop		Yes
● Freely usable digital b		Yes
● Counter		Yes
— Number, max.		4
— Counting frequency, max.		10 kHz
— Counting b		32 bit
— Counting direction up/down		Yes
● Digital b with oversampling		Yes
— Number, max.		8
— Values per cycle, max.		32
— Resolution, min.		7.8125 µs
Input voltage
● Type of b voltage	DC	DC	DC	120/230 V AC (47 Hz to 63 Hz)
● Rated value (DC)	24 V	24 V	8.2 V
● Rated value (AC)				230 V
● for signal "0"	-30 to +5V	-30 to +5V		0V AC to 40V AC
● for signal "1"	+11 to +30V	+11 to +30V		74 V AC to 264 V AC
Input current
● for signal "1", typ.	2.5 mA	6 mA		10.8 mA
for 10 k switched contact
— for signal "0"			0.35 to 1.2 mA
— for signal "1"			2.1 to 7 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)			0.5 mA
— for signal "1"			typ. 8 mA
for NAMUR encoders
— for signal "0"			0.35 to 1.2 mA
— for signal "1"			2.1 to 7 mA
Input delay (for rated value of b voltage)
● tolerated changeover time for changeover contacts			300 ms
for standard bs
— beterizable	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)	Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms	No	No
— at "0" to "1", min.	0.05 ms			1.5 ms
— at "0" to "1", max.	20 ms			4 ms
— at "1" to "0", min.	0.05 ms			10 ms
— at "1" to "0", max.	20 ms			10 ms
for interrupt bs
— beterizable		Yes
for counter/technological functions
— beterizable		Yes
for NAMUR bs
— at "0" to "1", max.			12 ms
— at "1" to "0", max.			12 ms
Cable length
● shielded, max.	1 000 m	50 m	200 m	1 000 m
● unshielded, max.	600 m	50 m		600 m
Encoder
Connectable encoders
● NAMUR encoder/changeover contact according to EN 60947			Yes
● Single contact / changeover contact unconnected			Yes
● Single contact / changeover contact connected with 10 kΩ			Yes
● 2-wire sensor	Yes	Yes		Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No	No
Filtering and processing time (TCI), min.	420 µs
Bus cycle time (TDP), min.	500 µs	125 µs
Jitter, max.	8 µs	5 µs
Interrupts/diagnostics/status inbation
Diagnostics function	Yes	Yes	Yes
Alarms
● Diagnostic alarm	Yes; channel by channel	Yes	Yes; channel by channel	No
● Hardware interrupt	Yes; Parameterizable, channels 0 to 7	Yes	Yes; Parameterizable, channels 0 to 7	No
Diagnostic messages
● Diagnostic inbation readable	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes	Yes	No
— beterizable	Yes	Yes	Yes
● Monitoring of encoder power supply	Yes; channel by channel	Yes; Module-wise	Yes; channel by channel
● Wire-break	Yes; Channel by channel, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm	No	Yes; channel by channel	No
● Short-circuit	Yes; channel by channel	Yes; Module-wise	Yes; channel by channel	No
● Group error			Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED	Yes; green PWR LED
● Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
● for channel diagnostics	Yes; Red LED	No	Yes; Red LED	No
● for module diagnostics	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes
● between the channels and the power supply of the electronics	No	No	Yes	No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	2 545 V DC/2 s (routine test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	0 °C
● vertical installation, max.	50 °C
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude	On request: Negative ambient temperature down to -30 °C (without condensation), installation altitudes between 2 000 m and 5 000 m			On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m
Dimensions
Width	15 mm	15 mm	15 mm	20 mm
Height	73 mm	73 mm	73 mm	73 mm
Depth	58 mm	58 mm	58 mm	58 mm
Weights
Weight, approx.	28 g	28 g	32 g	36 g

ET 200SP 和 ET200MP 的接口模块和IO模块可有以下功能分类。

基本 (BA): 为实现基本要求而设计的基本模块。
标准 (ST): 为标准要求而设计的标准模块并被大多数客户使用。
高性能 (HF): 高性能模块包含高级功能。
高速 (HS):高速模块为高速处理做了优化。

ET 200MP 各级别的接口模块的功能属性

属性	DP 标准 (ST)	PN 基本(BA)	PN 标准 (ST)	PN 高性能 (HF)
应用	标准要求	基本要求	标准要求	额外要求的高级功能
模块数量/机架	最多 12 个	最多 12 个	最多 30 个	最多 30 个
地址范围	每站最大 244 字节，每个模块最大 128 个字节 (输入和输出)	每站最大 64字节，每个模块最大 64 个字节 (输入和输出)	每站最大 512 字节，每个模块最大 256 个字节 (输入和输出)	每站最大 512 字节，每个模块最大 256 个字节 (输入和输出)
不带空插槽的组态控制 (可选操作)	不支持	不支持	支持	支持
时钟同步模式	PROFIBUS: 不支持	PROFIBUS: 不支持	PROFINET: 从 250µs起的同步	PROFINET: 从 250µs起的同步
I&M 数据(识别 & 维护)	支持: I&M0 to I&M3	支持: I&M0 to I&M3	支持: I&M0 to I&M3	支持: I&M0 to I&M3
介质冗余	不支持	MRP	MRP	MRP, MRPD
共享设备	不支持	最多 2个 IO 控制器的共享设备	最多 2个 IO 控制器的共享设备	最多 4个 IO 控制器的共享设备
模块内部的共享输入/输出 (MSI/MSO)	不支持	支持	支持	支持
在 S7-400H 中的系统冗余	不支持	不支持	不支持	支持 (须在 STEP 7 V5.5 SP3 中组态)
系统冗余 S2	不支持	不支持	不支持	支持

表 01

ET 200MP 的 IO 模块的功能属性

属性	基本 (BA)	标准 (ST)	高性能 (HF)	高速 (HS)
应用	基本模块	标准模块	复杂模块	高速应用的专用模块
参数的设定情况	无参数	模拟量模块: 通道负载组 / 模块1) 数字量模块: 负载组 / 模块	通道	负载组 / 模块或通道 (依据组态类型设定情况: 最短输入延迟
参数诊断	无诊断	模拟量模块: 每个通道每个负载组 / 模块1) 数字量模块 : 每个负载模块 / 模块	每个通道	每个通道: 最短处理时间
时钟同步模式	不支持	不支持	以下模块支持: DI 16 x 24V DC HF: 6ES7521-1BH00-0AB0 DI 32 x 24V DC HF: 6ES7521-1BL00-0AB0 DQ 16 x 24V DC / 0.5A HF: 6ES7522-1BH01-0AB0 DQ 32 x 24V DC / 0.5A HF: 6ES7522-1BL01-0AB0 AI 8xU/I HS 6ES7531-7NF10-0AB0 AQ 8xU/I HS 6ES7532-5HF00-0AB0 AQ 8xU/I HF 6ES7532-5ND00-0AB0	支持
特殊功能	只有数字量模块的基本版本，因为特定的系统原因模拟量模块总是有参数和诊断	使用模拟量模块: 通用模块精度 >= 0.3% 共模电压约 10V to 20V	使用模拟量模块: 最高精度(<0.1%) 高共模电压, 如果必要的话, 单通道隔离	-
附加功能	不支持	不支持	脉宽调制 DI集成计数可缩放的测量范围测量值的缩放测量范围调整	输入和输出的过采样

表 02

1)只能使用 PROFIBUS GSD 文件来配置。

ET 200SP 的接口模块的功能属性

属性	PN 基本(BA)	PN 标准(ST)	DP高性能 (HF)	PN 高性能 (HF)	PN 高速(HS)
应用	为小站点做了优化基本要求	优化的标准配置标准要求	高度灵活的应用额外要求的高级功能	高度灵活的应用额外要求的高级功能	优化的快速响应时间快速数据交换
接口	集成 RJ45 插座	PROFINET 连接通过铜总线适配器	集成 RS485 插座	PROFINET 连接通过铜总线或者光纤总线适配器	PROFINET 连接通过铜总线或者光纤总线适配器
每个机架的模块数量	最多12个模块 (除了 PROFIsafe)	最多32个模块+ 16 x ET 200AL (所有模块)	最多32个模块+ 16 x ET 200AL (所有模块)	最多64个模块+ 16 x ET 200AL (所有模块)	最多30个模块
地址范围	最大 32个字节每个模块和站 (输入和输出	最大 798 个字节每个站和256个字节每个模块 (输入和输出)	最大 244个字节每个站和244个字节每个模块 (输入和输出)	最大 1440 个字节每个站和288个字节每个模块 (输入和输出)	最大 968个字节每个站和32个字节每个模块 (输入和输出)
带/不带空插槽的组态控制	支持	支持	支持	支持	支持
带间隙的站运行	支持	支持	支持	支持	支持
时钟同步模式	不支持	不支持	不支持	从 250µs起的同步	从 125µs起的同步
最小更新时间	1ms (RT)	1ms (RT, IRT)	取决于组态和PROFIBUS波特率, 典型值 3ms	250µs (RT, IRT)	125µs (RT, IRT)
热插拔	单模块热插拔 (一个模块被移除后站点仍然运行)	单模块热插拔 (一个模块被移除后站点仍然运行)	多模块热插拔 (多个模块被移除后站点仍然运行)	多模块热插拔 (多个模块被移除后站点仍然运行)	多模块热插拔 (多个模块被移除后站点仍然运行)
I&M 数据 (识别& 维护)	支持:I&M0 to I&M3	支持:I&M0 to I&M3	支持:I&M0 to I&M3	支持:I&M0 to I&M4	支持:I&M0 to I&M3
介质冗余	MRP	MRP	不支持	MRP	MRP, MRPD
共享设备	不支持	最多 2个 IO 控制器的共享设备	不支持	最多 4个 IO 控制器的共享设备	最多4个 IO 控制器的共享设备
模块内部的共享输入/输出	不支持	支持	不支持	支持	支持
系统冗余 S2	不支持	不支持	不支持	支持	不支持
通过RESET 键恢复到出厂设置	不支持	支持	不支持	支持	支持
优先启动	支持	支持	不支持	支持	支持
过采样	不支持	不支持	不支持	支持	支持
模块通道分区成多个子模块	不支持	固件版本V3.3 及更高版本，带高性能和高速 IO模块	不支持	支持: 模块通道最多分区成4个子模块	支持: 模块通道最多分区成4个子模块

表 03

ET 200SP 的 IO 模块的功能属性

属性	基本 (BA)	标准 (ST)	高性能 (HF)	高速 (HS)
应用	为价格做了优化基本需求	为降低栈的使用做了优化标准需求	为快速定位错误做了优化高级要求	为短响应时间做了优化高速的数据交换
诊断	基本诊断	每个模块的诊断 (如:断线和短路 )	通道诊断	模块诊断或通道诊断
特殊功能			灵活的应用通过参数的高适应性可选择的操作模式和扩展模块功能	灵活的应用通过参数的高适应性可选择的操作模式和扩展模块功能

表 04

注意

所有 ET 200SP IO 模块都能在所有 ET 200SP 接口模块上使用。

例外:

PROFIsafe 模块无法在基本接口模块上使用。
技术模块TM Timer DIDQ 10x24V不能在DP接口模块上使用。

需要注意接口模块的功能限制会限制 IO 模块的功能使用。例如：
HF 和 HS IO 模块都支持时钟同步模式。基本、标准和 DP 接口模块不支持时钟同步模式

序号	说明与图示
1.	内部风冷驱动组件中电子单元和功率单元产生的功率损耗通过自然冷却或强制通风系统排散到控制柜内部
2.	外部风冷采用“穿孔”技术，系统组件中功率单元的散热器穿过控制柜内的安装面。因此可以将电力电路的热损耗释放到一个单独的外部冷却回路上，柜内残留的热损耗由电子元件产生。这种外部散热器可以达到IP54防护等级。散热器配有散热片和风扇(属于供货范围)，向后伸出一个单独的通风管道，该管道也可以向外打开。
3.	冷却板式冷却采用冷却板式冷却的单元可以将功率单元的热损耗通过单元后面板上的导热介质传导到一个外部散热器上。例如，外部散热器可采用水冷。
4.	液体冷却在液冷单元，功率半导体安装在冷却介质流经的散热器上，该单元产生的大部分热量会被冷却介质吸收并可在控制柜外耗散。

概述

应用

设计

可用 BU

端子的颜色标识

标记

系统内置屏蔽连接

技术规范

ET 200SP 以及 ET 200MP 的Basic (BA), Standard (ST), High Feature (HF) 和High Speed (HS) 模块之间有什么区别？

S120 书本型模块有哪些冷却方式

怎样连接串口模块的 RS485/RS422 接口？