Sensepoint XCD 固定式通用气体探测器
Sensepoint XCD 气体探测器是一种固定安装于存在易燃易爆或有毒气体场所,用来检测空气中可燃性气体、毒气及氧气浓度的仪器。
Sensepoint XCD 的传感器等核心部件采用多项专利技术使检测更精确、长期稳定性更好。XCD同一外壳适用催化燃烧、电化学和红外传感器,使其可测气体种类更多、范围更广。新增的RTD和RFD型号支持传感器和变送器远程安装,并可支持通用型4-20mA输出传感器。因此XCD广泛适用于石油、化工、冶金、制造业等通用工业领域,而且在一些环境恶劣的环境同样表现卓越。
Sensepoint XCD(XCD 与英语“超越”谐音)包含1 台气体变送器和多种可选的传感器,
包括:可燃气体传感器,毒气传感器和氧气传感器。Sensepoint XCD 的结构适用于危险
环境,当然也适用于普通环境。
Sensepoint XCD 配备有多种气体传感器,可以检测很多种气体。想具体了解
Sensepoint XCD 能检测哪些气体,请联系Honeywell 探测器公司获取更多信息。
Sensepoint XCD 的变送器除了能进行现场显示外,还配备有3 个可编程继电器,可
以控制外接声光报警器,电磁阀以及开关等外部设备。Sensepoint XCD 的变送器采用标
准工业3 线制接线方式,输出4-20mA 模拟量信号给气体检测控制系统或PLC。
Sensepoint XCD 的标定和维护是通过一根磁棒完成的。这样,只需1 名操作人员就
可以在不开盖的情况下完成日常维护。Sensepoint XCD 适用于1 类和2 类危险区域(欧
洲)或Class 1 Division 1 或 Division 2(北美)。
Sensepoint XCD 有以下主要部分组成(如下所示):
变送器:
Sensepoint XCD 变送器外壳有3 个接线口。其中2 个是电缆接线口,用于连接电源
线,信号线以及继电器回路接线。底部接线口用于连接传感器。Sensepoint XCD 变送器
集成安装底板让Sensepoint XCD 适用于多种安装方式。
Sensepoint XCD 变送器上的现场LCD 显示能显示气体类型,气体浓度,报警信息以
及仪表状态信息。显示模块能够提供数字显示,柱状图显示以及图形标识。
当用磁棒操作的时候,Sensepoint XCD 变送器的LCD 也能显示诊断信息。变送器表
壳上有1 个玻璃窗,用户可以用磁棒隔着玻璃窗对仪表进行操作。采用磁棒操作使得用
户能对Sensepoint XCD 进行单人标定和设置。
Sensepoint XCD 显示和磁棒操作示意图
可燃气体、毒气和氧气传感器
Sensepoint XCD 变送器配备有2 种工作原理的可燃气体传感器:非色散型点式红外
(NDIR)传感器和催化燃烧传感器。
此外,Sensepoint XCD 变送器能够用来测来能够多种有毒气体。Sensepoint XCD 采
用电化学工作原理(ECC)检测有毒气体和氧气。
Sensepoint XCD 可燃、有毒和氧气传感器示意图
附件:
Sensepoint XCD 配备有许多附件,以满足不同应用场合的适用。这些附件包括:安装附件,维修工具,天气保护罩、标定帽、集气罩、管道安装附件和传感器接线盒。
订货信息:
序列号 说明
Sensepoint XCD 变送器和传感器套件
SPXCDAAMFX 甲烷(催化) 0-100%LEL (20,0 ~ 100.0%LEL, 10%LEL),铝合金,M20 接口
SPXCDAAMRX 甲烷(IR) 0-100%LEL (20,0 ~ 100.0%LEL, 10%LEL) ,铝合金,M20 接口
SPXCDAAMO1 氧气 25.0%/Vol,铝合金,M20 接口
SPXCDAAMHX 硫化氢 0-50ppm (10.0 ~ 100.0ppm, 1ppm) ,铝合金,M20 接口
SPXCDAAMCX 一氧化碳 0-500ppm (100 ~ 1000ppm, 100ppm) ,铝合金,M20 接口
SPXCDAAMG1 氢气 0-1000ppm ,铝合金,M20 接口
可更换传感仓
SPXCDXSFXSS 甲烷(催化) 0-100%LEL (20,0 ~ 100.0%LEL, 10%LEL)
SPXCDXSRXSS 甲烷(IR) 0-100%LEL (20,0 ~ 100.0%LEL, 10%LEL)
SPXCDXSO1SS 氧气25.0%/Vol
SPXCDXSHXSS 硫化氢 0-50ppm (10.0 ~ 100.0ppm, 1ppm)
SPXCDXSCXSS 一氧化碳0-500ppm (100 ~ 1000ppm, 100ppm)
SPXCDXSG1SS 氢气0-1000ppm
附件
S3KCAL 标定帽
SPXCDCC 锥形集气罩(用于被测气体密度低于空气场合,如氢气)
SPXCDDMK 风道安装套件
SPXCDHMANEN 英文手册
SPXCDMTBR 管道安装套件
SPXCDSDP 遮阳罩
配件
SPXCDDMT 可更换显示模块 (电化学,含氧气和毒气)
SPXCDDMF 可更换显示模块 (催化燃烧和红外)
SPXCDTMO 可更换电源模块 (电化学-氧气)
SPXCDTMT 可更换电源模块 (电化学-毒气)
SPXCDTMF 可更换电源模块 (催化燃烧和红外)
SPXCDNPTP 3/4"NPT 接头
SPXCDM20P M20 接头
SPXCDMANCD CD 版 操作手册
SPXCDNADP 3/4”NPT 到 M20 转接头
SPXCDWP 天气保护器
SPXCDMAG 磁棒
SPXCDSRLS 传感器固定器(带锁紧螺丝)
SPXCDAKS 传感器固定器(带锁紧螺丝)
SPXCDHWES 六角扳手(接地螺丝用)
SPXCDEBS 接地固定片和螺丝
1. INSTRUMENT |
|
|
|
ATEX/IECEX/CHINA APPROVAL (Epoxy Coated Aluminium Alloy, LM25) |
|
|
|
SPXCDALMFX |
ATEX/IECEX & AP approved SP XCD Flammable CAT, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry |
SPXCDALMRX |
ATEX/IECEX & AP approved SP XCD CH4(Methane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry |
SPXCDALMPX |
ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry |
SPXCDALMO1 |
ATEX/IECEX & AP approved SP XCD Oxygen, 25.0%/Vol with LM25, M20 Entry |
SPXCDALMHX |
ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide |
SPXCDALMCX |
ATEX/IECEX & AP approved SP XCD Carbon Monoxide |
SPXCDALMG1 |
ATEX/IECEX & AP approved SP XCD Hydrogen |
SPXCDALMNX |
ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide |
SPXCDALMB1 |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-2%VOL with LM25, M20 Entry |
SPXCDALMB2 |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-5%VOL with LM25, M20 Entry
|
ATEX/IECEX/CHINA APPROVAL (Epoxy coated Stainless Steel, SS316) |
|
|
|
|
|
|
|
SPXCDASMFX |
ATEX/IECEX & AP approved SP XCD Flammable CAT |
|
|
SPXCDASMRX |
ATEX/IECEX & AP approved SP XCD CH4(Methane) IR |
|
|
SPXCDASMPX |
ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR |
|
|
SPXCDASMO1 |
ATEX/IECEX & AP approved SP XCD Oxygen |
|
|
SPXCDASMHX |
ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide |
|
|
SPXCDASMCX |
ATEX/IECEX & AP approved SP XCD Carbon Monoxide |
|
|
SPXCDASMG1 |
ATEX/IECEX & AP approved SP XCD Hydrogen |
|
|
SPXCDASMNX |
ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide |
|
|
SPXCDASMB1 |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-2%VOL with SS316, M20 Entry |
|
|
SPXCDASMB2 |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-5%VOL with SS316, M20 Entry |
|
|
|
|
|
|
ATEX/IECEX/CHINA APPROVAL (Epoxy Coated Aluminium Alloy, LM25, With Modbus) |
|
|
|
|
|
|
|
SPXCDALMFXM |
ATEX/IECEX & AP approved SP XCD Flammable CAT, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus |
|
|
SPXCDALMRXM |
ATEX/IECEX & AP approved SP XCD CH4(Methane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus |
|
|
SPXCDALMPXM |
ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus |
|
|
SPXCDALMO1M |
ATEX/IECEX & AP approved SP XCD Oxygen, 25.0%/Vol with LM25, M20 Entry, With Modbus |
|
|
SPXCDALMHXM |
ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide |
|
|
SPXCDALMCXM |
ATEX/IECEX & AP approved SP XCD Carbon Monoxide |
|
|
SPXCDALMG1M |
ATEX/IECEX & AP approved SP XCD Hydrogen |
|
|
SPXCDALMNXM |
ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide |
|
|
SPXCDALMB1M |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-2%VOL with LM25, M20 Entry, With Modbus |
|
|
SPXCDALMB2M |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-5%VOL with LM25, M20 Entry, With Modbus |
|
|
|
|
|
|
ATEX/IECEX/CHINA APPROVAL (Epoxy coated Stainless Steel, SS316, With Modbus) |
|
|
|
|
|
|
|
SPXCDASMFXM |
ATEX/IECEX & AP approved SP XCD Flammable CAT |
|
|
SPXCDASMRXM |
ATEX/IECEX & AP approved SP XCD CH4(Methane) IR |
|
|
SPXCDASMPXM |
ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR |
|
|
SPXCDASMO1M |
ATEX/IECEX & AP approved SP XCD Oxygen |
|
|
SPXCDASMHXM |
ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide
|
|
|
SPXCDASMCXM |
ATEX/IECEX & AP approved SP XCD Carbon Monoxide |
|
|
SPXCDASMG1M |
ATEX/IECEX & AP approved SP XCD Hydrogen |
|
|
SPXCDASMNXM |
ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide |
|
|
SPXCDASMB1M |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-2%VOL with SS316, M20 Entry, With Modbus |
|
|
SPXCDASMB2M |
ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide)IR 0-5%VOL with SS316, M20 Entry, With Modbus |
|
|
|
|
|
|
UL APPROVAL (Epoxy Coated Aluminium Alloy, LM25) |
|
|
|
|
|
|
|
SPXCDULNFX |
UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry |
|
|
SPXCDULNRX |
UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry |
|
|
SPXCDULNPX |
UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry |
|
|
SPXCDULNO1 |
UL approved SP XCD Oxygen 25.0%/Vol with LM25, 3/4"NPT Entry |
|
|
SPXCDULNHX |
UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25, 3/4"NPT Entry |
|
|
SPXCDULNCX |
UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with LM25, 3/4"NPT Entry |
|
|
SPXCDULNG1 |
UL approved SP XCD Hydrogen 0-1000ppm with LM25, 3/4"NPT Entry |
|
|
SPXCDULNNX |
UL approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, 3/4"NPT Entry |
|
|
SPXCDULNB1 |
UL approved SP XCD Carbon Dioxide IR 0-2%VOL with LM25, 3/4"NPT Entry |
|
|
SPXCDULNB2 |
UL approved SP XCD Carbon Dioxide IR 0-5%VOL with LM25, 3/4"NPT Entry |
|
|
|
|
|
|
|
|
|
|
UL APPROVAL (Epoxy Coated Stainless Steel, SS316) |
|
|
|
|
|
|
|
SPXCDUSNFX |
UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNRX |
UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNPX |
UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNO1 |
UL approved SP XCD Oxygen 25.0%/Vol with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNHX |
UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNCX |
UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNG1 |
UL approved SP XCD Hydrogen 0-1000ppm with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNNX |
UL approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNB1 |
UL approved SP XCD Carbon Dioxide IR 0-2%VOL with SS316, 3/4"NPT Entry |
|
|
SPXCDUSNB2 |
UL approved SP XCD Carbon Dioxide IR 0-5%VOL with SS316, 3/4"NPT Entry |
|
|
|
|
|
|
UL APPROVAL (Epoxy Coated Aluminium Alloy, LM25. With Modbus) |
|
|
|
|
|
|
|
SPXCDULNFXM |
UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNRXM |
UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNPXM |
UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNO1M |
UL approved SP XCD Oxygen 25.0%/Vol with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNHXM |
UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNCXM |
UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNG1M |
UL approved SP XCD Hydrogen 0-1000ppm with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNNXM |
UL approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNB1M |
UL approved SP XCD Carbon Dioxide IR 0-2%VOL with LM25, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDULNB2M |
UL approved SP XCD Carbon Dioxide IR 0-5%VOL with LM25, 3/4"NPT Entry, with Modbus. |
|
|
|
|
|
|
UL APPROVAL (Epoxy Coated Stainless Steel, SS316. With Modbus) |
|
|
|
|
|
|
|
SPXCDUSNFXM |
UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNRXM |
UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNPXM |
UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNO1M |
UL approved SP XCD Oxygen 25.0%/Vol with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNHXM |
UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNCXM |
UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNG1M |
UL approved SP XCD Hydrogen 0-1000ppm with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNNXM |
UL approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNB1M |
UL approved SP XCD Carbon Dioxide IR 0-2%VOL with SS316, 3/4"NPT Entry, with Modbus. |
|
|
SPXCDUSNB2M |
UL approved SP XCD Carbon Dioxide IR 0-5%VOL with SS316, 3/4"NPT Entry, with Modbus. |
|
|
|
|
|
|
2. Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors) |
|
||
|
|
|
|
Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA b type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remoby from another b. |
|
|
|
|
|
|
|
2.1 INSTRUMENT |
|
|
|
|
|
|
|
Without Modbus |
|
|
|
SPXCDALMTX4 |
ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
|
|
SPXCDASMTX4 |
ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
|
|
SPXCDULNTX4 |
cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
|
|
SPXCDUSNTX4 |
cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
|
|
|
|
|
|
With Modbus |
|
|
|
SPXCDALMTX4M |
ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
|
|
SPXCDASMTX4M |
ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
|
|
SPXCDULNTX4M |
cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
|
|
SPXCDUSNTX4M |
cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
|
|
|
|
|
|
Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA b XCD-RTD transmitter. |
|
3. Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)
Sensepoint XCD-RFD (Remote Flammable Detector) allows for remoby mounted flammable gas detectors such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored from a convenient b.
KIT includes Transmitter, Magnetic Wand and Allen Key
3.1 INSTRUMENT |
|
|
|
Without Modbus |
|
SPXCDALMRFD |
ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25 |
SPXCDASMRFD |
ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS |
SPXCDULNRFD |
cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
SPXCDUSNRFD |
cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
With Modbus |
|
SPXCDALMRFDM |
ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25 |
SPXCDASMRFDM |
ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS |
SPXCDULNRFDM |
cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
|
|
|
|
SPXCDUSNRFDM |
cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor b Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
|
|
3.2 Remote Flammable Sensor (XCD Sensor Cartridge + Socket Housing) |
|
SPXCDXSRFXSS |
Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
SPXCDXSRRXSS |
Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
SPXCDXSRPXSS |
Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
SPXCDXSRB1SS |
Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
SPXCDXSRB2SS |
Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
00780-A-0100 |
Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified) |
4. ACCESSORIES, CONSUMABLES & SPARES |
||
|
|
|
4.1. ACCESSORIES |
|
|
|
|
|
S3KCAL |
Calibration cap |
|
SPXCDCC |
Collecting cone for use with lighter than air gases |
|
SPXCDDMK |
Duct mounting kit |
|
SPXCDMTBR |
Mounting bracket (inc. bolts, nuts, brackets) |
|
SPXCDSDP |
Sunshade / Deluge Protection |
|
SPXCDFH |
Flow Housing for Sample Panel |
|
|
|
|
4.2 Consumables |
|
|
|
SPXCDXSFXSS |
Flammable CAT 0-100%LEL (20,0 to 100.0%LEL) |
SPXCDXSRXSS |
CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL) |
SPXCDXSPXSS |
C3H8 (Propane) IR 0-100%LEL (20,0 to 100.0%LEL) |
SPXCDXSO1SS |
Oxygen 25.0%/Vol only |
SPXCDXSHXSS |
Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm) |
SPXCDXSCXSS |
Carbon Monoxide 0-300ppm (100 to 1000ppm) |
SPXCDXSG1SS |
Hydrogen 0-1000ppm only |
SPXCDXSNXSS |
Nitrogen Dioxide 10-50ppm (10.0 to 50.0ppm) |
SPXCDXSB1SS |
Carbon Dioxide IR 0-2%VOL only |
SPXCDXSB2SS |
Carbon Dioxide IR 0-5%VOL only |
Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA b XCD-RTD transmitter.
4.3 Spares (Miscellaneous) |
|
|
|
SPXCDWP |
Sensepoint XCD Standard Weather Protection |
SPXCDSRLS |
Sensor Retainer with locking screw |
SPXCDAKS |
Allen key for stopper |
SPXCDHWES |
Hex wrench for earth screw |
SPXCDEBS |
Earth Bracket and Screws |
SPXCDMAG |
Magnetic wand(磁棒) |
SPXCDRSSH |
Sensor Socket Housing for XCD |
SPXCDMBUS |
Replacement Modbus Module |
SPXCDSERVK |
XCD Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3 pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and sensor retainer (2 pieces) |
SPXCDTOOLK |
XCD Service Tool Kit, Including Magnet, Hex wrench for earth screw and Allen key for locking screws |
SPXCDTMK |
XCD Terminals Kit, Including Terminal block for relays (green) and Terminal block power & signal (green) |
SPXCDNPTP |
3/4"NPT plug (Certified as part of Ex d enclosure) |
SPXCDM20P |
M20 plug (Certified as part of Ex d enclosure) |
4.4 Spares (Replacement Display Module)
Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires confiiguration after fitting via the menu.
SPXCDDMT |
Replacement display module for O2 & Toxic |
SPXCDDMF |
Replacement display module for FL & IR |
SPXCDDM4 |
Replacement display module for RTD (4~20mA) |
SPXCDDMR |
Replacement display module for RFD |
SPXCDDMT12 |
Replacement O2 & Toxic display module Without Modbus for 12-32 Vdc |
SPXCDDMF12 |
Replacement FL & IR display module Without Modbus for 12-32 Vdc |
SPXCDDMTM12 |
Replacement O2 & Toxic display module with Modbus for 12-32 Vdc |
SPXCDDMFM12 |
Replacement FL & IR display module with Modbus for 12-32 Vdc |
SPXCDDMTM |
Replacement display module for O2 & Toxic with Modbus |
SPXCDDMFM |
Replacement display module for FL & IR with Modbus |
SPXCDDM4M |
Replacement display module for RTD with Modbus |
SPXCDDMRM |
Replacement display module for RFD with Modbus |
4.5 Spares (Replacement Terminal Module)
Each replacement terminal module includes pre-configured PCB (for sensor and range), terminals, screws, 'U' clamp, plastic cover and fixing screws.
SPXCDTMO |
Replacement terminal module for O2 |
SPXCDTMT |
Replacement terminal module for Toxic |
SPXCDTMF |
Replacement terminal module for FL & IR |
SPXCDTMO12 |
Replacement O2 terminal module for 12-32 Vdc |
SPXCDTMT12 |
Replacement Toxic terminal module for 12-32 Vdc |
SPXCDTMF12 |
Replacement FL & IR terminal module for 12-32 Vdc |
SPXCDTM4 |
Replacement terminal module for RTD (4~20mA) |
SPXCDTMR |
Replacement terminal module for RFD |
4.6 Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS )
SPXCDALMTXO |
ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
SPXCDALMTXT |
ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
SPXCDALMTXF |
ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
SPXCDASMTXO |
ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
SPXCDASMTXT |
ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
SPXCDASMTXF |
ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
4.7 Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only with MODBUS )
SPXCDALMTXOM |
ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
SPXCDALMTXTM |
ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
SPXCDALMTXFM |
ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
SPXCDASMTXOM |
ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
SPXCDASMTXTM |
ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
SPXCDASMTXFM |
ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
4.8 Spares (UL APPROVAL Replacement XCD STD version Transmitter only without MODBUS )
SPXCDULNTXO |
UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
SPXCDULNTXT |
UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
SPXCDULNTXF |
UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
SPXCDUSNTXO |
UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
SPXCDUSNTXT |
UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
SPXCDUSNTXF |
UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
4.9 Spares (UL APPROVAL Replacement XCD STD version Transmitter only with MODBUS )
SPXCDULNTXOM |
UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
SPXCDULNTXTM |
UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
SPXCDULNTXFM |
UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
SPXCDUSNTXOM |
UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
SPXCDUSNTXTM |
UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
SPXCDUSNTXFM |
UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
5. Special Flammable Gas Calibrations
SPXCDSFGC1 |
Special Flammable Gas Calibration, 0-100%LEL, 1* |
SPXCDSFGC2 |
Special Flammable Gas Calibration, 0-100%LEL, 2* |
SPXCDSFGC3 |
Special Flammable Gas Calibration, 0-100%LEL, 3* |
SPXCDSFGC4 |
Special Flammable Gas Calibration, 0-100%LEL, 4* |
SPXCDSFGC5 |
Special Flammable Gas Calibration, 0-100%LEL, 5* |
SPXCDSFGC6-H |
Special Flammable Gas Calibration, 0-100%LEL, 6* - Hydrogen |
SPXCDSFGC7 |
Special Flammable Gas Calibration, 0-100%LEL, 7* |
SPXCDSFGC8 |
Special Flammable Gas Calibration, 0-100%LEL, 8* |
(Note: If no Special Flammable Gas Calibration part no. is included on PO, a Methane (6* calibration will be supplied)
上海宛畅实业有限公司是一家自动化设备及工业零部件的专业供应商.公司成立于2012年,专注于为石油,化工,电力,钢铁,制药,环保等领域终端用户提供工程配套自动化设备及工控备件.
公司依托国内外一批成熟大客户:中海油渤海钻井平台,山东瑞星化工,河北沙河电厂,PAKISTAN NATIONAL REFINERY LIMITED,Petro Oil Supply SDN BHD,THUSO MOLOSIWA BOTSWANA POWER CORPORATION,巴西PAMPA1X345MW燃煤电站等,拥有一批非常优势的品牌资源.
主营:Honeywell霍尼韦尔气体探测,Micro Motion艾默生高准质量流量计,罗斯蒙特变送器,霍尼韦尔控制系统与集成,燃烧控制产品,环境自控,阀门执行器、开关等。
#上海宛畅实业有限公司#专业销售欧美日韩进口的工控产品、仪器仪表等工控备件!
原装进口、型号全、价格优,欢迎询价!