产品简介
MVC-1000A1/D1显微硬度计
MVC-1000A1/D1显微硬度计
产品价格:¥2
上架日期:2011-08-03 16:04:40
产地:广州
发货地:广州
供应数量:不限
最少起订:1台
浏览量:420
资料下载:暂无资料下载
其他下载:暂无相关下载
详细说明
    MVC-1000A1/MVC-1000D1显微硬度计造型新颖、美观、而且它具有良好的可靠性,可操作性和直观性。内置硬度计算器,可通过输入压痕对角线长度,直接在LCD屏幕上显示硬度值。 

        该机采用高倍率光学测量系统,目镜鼓轮一次读数。可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。   

        The MVC-1000A1 type counts to show the degree of hardness accounts the shape novel and beautiful,and it have the good and dependable,maneuverability with keep the view.the inside places the degree of hardness calculator,can pass the importation press the diagonal line length,direct the manifestation degree of hardness is worth in LCD holding the act.    

        That machine adopts the high magnification optics the diagraph the system,the eyes drum round is a to read the number.Can measurese the steel,have the color bls,the thin slice of IC,thin plastics,bls thin slice and draw the layer,surface layer,layer press the bls,heat handles the carbonization layer hardens the depth of the layer with the fire of and degree of hardness steps degree.   

    技术规格 Main technical beters
    显微硬度标尺: Vickers scales:
        HV0.01,HV0.025,HV0.05,HV0.1,HV0.3,HV0.5,HV1      HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5, HV1
    显示:保持时间(秒),硬度值 Display: dwell time(s),Hardness
    试验力(gf):10,25,50,100,200,300,500,1000 Test force(gf):10,25,50,100,200,300,500,1000
    加载控制:自动(加载/保持/卸载) Load control:automatic(loading/dwell/unload)
    试验力保持时间(s):5~60 Total test force dwell time(S):5~60
    试验力选择:外置式选力旋钮,试验力自动显示在LCD屏上 Test force selection:External force election knob
       the test showed strength in LCD screen
    物镜:10×,40× Objective magnification:10×,40×
    目镜放大倍数:10× Eyepiece magnification:10×
    总放大倍数(μm):100×(观察), 400×(测量) Total magnification:100×(Observation), 400×(measurement)
    测量范围(μm):200 Measuring range(μm):200
    分辨率(μm):0.25 Resolution(μm):0.25
    测量范围:(5-3000)HV  Measuring range:(5-3000)HV
    XY试台     尺寸(mm):100×100 XY stage   Dimensions(mm):100×100
             行程范围(mm):25×25            Travel range(mm):25×25
             最小读数(mm):0.01            Minimum reading: 0.01
    试件最大高度(mm):85(2.55") Max height of speciments(mm):85(2.55")
    试件最大宽度(mm):120(3.35")(从压头中心线至机壁距离) Distance from indeneter's center to outerwall(mm):120
    输出:内置式微打(选配)、RS232串行接口   Output:built-in printer(Select Configure),RS232 serial
    电源电压:AC220V/50HZ Power supply:AC220V/50HZ
    外形尺寸(mm):490×310×515 Dimensions(mm):490×310×515
    重量(kg):35 Weight(kg):35
在线询盘/留言
  • 免责声明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,本网对此不承担任何保证责任。我们原则 上建议您选择本网高级会员或VIP会员。
    企业信息
    广州市广精精密仪器有限公司
    会员级别:
    ------------ 联系方式 ------------
    联系人:魏小姐(先生)
    联系电话:020-80905357
    联系手机:13580381135
    传真号码:020-87684676
    企业邮箱:gz17@163.com
    网址:gzydyq6.jdzj.com
    邮编:510070
    推荐供应
    0571-87774297