该机采用高倍率光学测量系统，装有旋转编码器的测微目镜可进一步提升测量过程自动化的程度。可测定钢、有色金属、IC薄片、薄塑料、金属薄片、涂层、表面覆层、层压金属、热处理碳化层和淬火硬化层的深度与硬度梯度。是一款价廉实用性强的数显显微硬度计。

    MVS-1000A1/D1 digital micro hardness tester new b of dollars, beautiful, and it has a good reliability, interoperability and intuitive. By measuring the length of the diagonal indentation directly in the LCD screen hardness. No keyboard b through the calculation of the value of hardness.

     The aircraft used high-rate optical measuring system, equipped with a rotary encoder of the eyepiece micrometer will further enhance the process of measuring the degree of automation. Determination may be steel, nonferrous bls, IC thin, thin plastic, foil, coating, surface coating, laminated bl, heat treatment hardening quenched carbide layer and layer of depth and hardness gradient. Is a cheap and practical for a digital micro-hardness. 

 

技术规格	Main technical beters
显微硬度标尺:	Vickers scales:
HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1	HV0.01,HV0.025,HV0.05,HV0.1,HV0.2,HV0.3,HV0.5,HV1
显示:自动读数菜单显示5位数的硬度值	Display: Hardness value   5-digit
4位数的对角线长度（D1，D2）	Diagonal length  4-digit(D1,D2)
试验力,保持时间,测试次数,返回	Load duration    Dwell time(sec)
	Statistics       No.
	Return
试验力(gf):10，25，50，100，200，300，500，1000	Test force(gf):10，25，50，100，200，300，500，1000
加载控制:自动（加载/保持/卸载）	Load control:automatic(loading/dwell/unload)
试验力保持时间(s):5～60	Total test force dwell time(S):5~60
试验力选择:外置式选力旋钮	Test force selection:External force election knob
物镜放大倍数:10×，40×	Objective magnification:10×，40×
光通道:双光通道（目镜及CCD摄象通道）	Optical path:2-way switchable(eyepiece and camera)
测量目镜:自动数字式编码器	Measuring eyepiece:Automatic digital encoders
总放大倍数(μm):100×（观察）, 400×（测量）	Total magnification:100×（Observation）,400×（measurement）
硬度测量范围:(5-2500)HV  (对角线长度范围:200μm)	Degree of hardness test seope:(5-2500)HV
	(Length of the diagonal range: 200μm)
分辨率(μm):0.01	Resolution:(μm):0.01
XY试台     尺寸(mm):100×100	XY stage   Dimensions(mm):100×100
行程范围(mm):25×25	Travel range(mm):25×25
最小读数(mm):0.01	Minimum reading: 0.01
试件最大高度(mm):85（2.55")	Max height of speciments(mm)：85（2.55")
试件最大宽度(mm):120(3.35")(从压头中心线至机壁距离）	Distance from indeneter's center to outerwall(mm)：120
输出:内置微型打印机(选配)，（RS232串行接口）	Output:built-in printer(Select Configure),RS232 serial
电源电压:AC220V/50HZ	Power supply:AC220V/50HZ
外形尺寸(mm):490×310×515	Dimensions(mm):490×310×515
重量(kg):35	Weight(kg):35