防爆立式配电箱|配电柜|防爆挂式配电柜

一、适用范围
1．适用于性气体环境1区、2区危险场所；
2．适用于IIA、IIB、IIC级性气体环境；
3．适用于可燃性粉尘环境20区、21区、22区；
4．适用于温度组别为T1—T6的环境；
5．适用于石油石化、化工、酿酒、医药、油漆、纺织、印染、军工设施等性危险环境；
One, applicable scope
1 suitable for explosive gas atmospheres zone 1, zone 2 hazardous;
The 2 applies to IIA, IIB, IIC explosive gas environment;
3 can be used in flammable dust environment 20, zone 21, zone 22 zone;
4 was applied to the temperature required for T1 - T6 environment;
5 applied in the petrochemical, chemical, brewing, medicine, paint, textile, printing and dyeing, military facilities and other explosive dangerous environment;

二、产品特点
1． 本产品外壳采用优质钢板焊接而成，表面高压静电喷塑，外形美观；
2． 本产品为复合型防爆结构，开关箱采用隔爆型结构，母线箱及接线箱采用增安型结构；
3． 内装高分断小型漏电断路器或塑壳式漏电断路器，通过操作防爆客体外的手柄而实现分合；
4． 本产品全面推出新型优化的设计方案及操作机构，结构紧凑合理、通用性强、操作灵活方便、手感好；
5． 具有过载、短路、缺相、漏电保护功能；
6． 所有紧固件均采用抗强腐蚀的304不锈钢材质；
7． 布线方式，钢管或电缆、防爆软管均可；
8． 可根据用户要求特殊定制；
Two, product characteristics
The 1 shell products using high-quality steel welded together, with high-pressure electrostatic plastic-sprayed surface, beautiful appearance;
2 this product is a compound type explosion-proof structure, the switch structure, bus box and junction box adopts increase Ann type structure;
3 built-in high breaking miniature electric leakage circuit breaker or molded case leakage circuit breakers, through the operation of the handle and the realization of in vitro explosion-proof passenger division;
4 the product launched a comprehensive new optimization design and operation mechanism, reasonable and compact structure, strong versatility, convenient operation, good hand feeling;
With overload, short circuit, the 5 phase, the leakage protection function;
6 all the fastening pieces are made of strong corrosion of 304 stainless steel;
The 7 wiring way, steel tube or cable, explosion-proof hose can be;
8 according to the user request special custom;

三、技术参数
防爆标志：ExdeIIBT4/T5/T6、ExdeIICT4/T5/T6、DIP A20 TA,T4/T5/T6；
额定电压：AC220/380V, 非标准电压：12V/24V/36V/127V/660V；
总开关电流：10A—800A；分开关电流：1A—630A；
防护等级：IP54/IP55/IP65；
螺纹规格：DN15-DN100/G1/2-G4寸
引入线规格：直径6mm-80mm；引出线规格：直径6mm-80mm；
引入引出方向：上进上出，下进下出（可按客户要求不受限制）
Explosion proof mark: ExdeIIBT4 / T5 / T6, ExdeIICT4 / T5 / T6, DIP A20 TA, T4 / T5 / T6;
Rated voltage: AC220 / 380V, non standard voltage: 12V / 24V / 36V / 127V / 660V;
General switch current: 10A - 800A; branch switch current: 1A - 630A;
Protection grade: IP54 / IP55 / IP65;
Thread specification: DN15-DN100 / G1 / 2-G4"
Introducing line specifications: 6mm-80mm diameter; lead wire diameter specifications: 6mm-80mm;
Introduction: progress on the lead-out direction, lower in and out ( according to customer requirements and restrictions )

四、产品运送
    物流/提货时用户付运费(因用户遍布全国各地，公司不保证物流费用的一致，所以公司实行需方付运费政策，如有不便敬请谅解，特殊情况另定)公司产品经过正规检验机构检验合格，对产品质量请不要质疑。此产品为易损品，因产品交付第三方运输，所以不保证产品在运输期间不会出现破损情况，如到货后发现有破损情况，请及时联系本公司。请严格按照产品说明书安装，并由专业电工人员进行安装。